Inventor General Discussion

New Member
Posts: 1
Registered: ‎01-29-2014
Message 1 of 2 (116 Views)

Vehicle Seat Frame Simulation

116 Views, 1 Replies
01-29-2014 06:32 PM



I was wondering if anyone would have any advice relating to an issue I'm having with an Inventor 2012 stress simulation.  I am working on a seat for a truck and am currently attempting to simulate a crash, to check the strength of the seatbelt anchorages.  As you can see in the attached picture, a 3 point belt is to be used, attaching to an upper bolted anchroage and two lower, bolted anchorages.  The only information I have related to testing conditions is that a force of 6750N is to be applied too two traction devices, that simualte the belt straps.  I'm having some issues recreating these conditions in the inventor simulation environment.  The main issue I am having is accurately recreating the force conditons at all 3 anchorages, namely the direction and the points at which the force is applied.  Using the forces I currently am, I am obtaining what appears to be a number of stress singularities (stresses of around 3000MPa) which I think may be a result of the force conditions I am using.  Any information on an easy way to achieve semi-relevant simulation conditions would be appreciated.



*Expert Elite*
Posts: 26,359
Registered: ‎04-20-2006
Message 2 of 2 (74 Views)

Re: Vehicle Seat Frame Simulation

01-30-2014 03:43 AM in reply to: lukea125

Can you attach the Inventor file(s) here?

Please mark this response as "Accept as Solution" if it answers your question.
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor