Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am trying to do a tube and pipe run as per a customers supplied drawings. They are calling for a 90 deg elbow welded directly to another one, which is possible. When I try to do this in tube and pipe I get errors because of my minimum segment length. Does anybody know of a method I can accomplish this without manually inserting the elbows as I have done. I am required to generate an iso drawing from these afterwards and fear that I will loose my centre lines in the dwg.
As far as I know, you're hitting one of the limitations of auto-routed segments / tube & pipe. I've done quite a bit of piping in IV, and there's no workaround for this that I know of. Sorry 😞
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")