Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Stainless steel channel

9 REPLIES 9
Reply
Message 1 of 10
scoopthepoop2000
2108 Views, 9 Replies

Stainless steel channel

I am using IV 2010. Does anyone have any stainless steel channel drawn up? Particularly 3 X 4.75#,  4 X 6.69# and 6 X 8.3#.  Thanks.

9 REPLIES 9
Message 2 of 10
Cadmanto
in reply to: scoopthepoop2000

Have you tried looking in content center?

channel.PNG

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Message 3 of 10

All I have in my content center are some ANSI steel and a bunch of other foreign industrial standards none of which appear to be stainless or have the correct profile for a stainless channel.  Thanks.

Message 4 of 10
mrattray
in reply to: scoopthepoop2000

I may be wrong, but I'm pretty sure stainless channels use the same profile as steel channels.

Mike (not Matt) Rattray

Message 5 of 10
Cadmanto
in reply to: scoopthepoop2000

Make sure you don't have any filters preventing you frm seeing what you want to see.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! Smiley Very Happy

Best Regards,
Scott McFadden
(Colossians 3:23-25)


Message 6 of 10
scoopthepoop2000
in reply to: mrattray

I am not sure they are, the only thing that I have to go by is my old Ryerson stock book and it shows the web, the flange, and the weight being different.

Message 7 of 10

The profile should be the same as ANSI MC/C just insert as custom and then change the material.

Chanel.png


Product Design & Manufacturing Collection 2024
Sometimes you just need a good old reboot.
Message 8 of 10
mrattray
in reply to: scoopthepoop2000

I don't even have the sizes your looking for in my Alro book (under SS or HRS).

Mike (not Matt) Rattray

Message 9 of 10

Also, if the sizes don't match you can change them as well if you insert as custom.


Product Design & Manufacturing Collection 2024
Sometimes you just need a good old reboot.
Message 10 of 10
mrattray
in reply to: Ray_Feiler

I just use i-Features to place structural components. Then I can just populate it with whatever I need it to be.

Mike (not Matt) Rattray

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report