Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I think if you are referring to the Return function on the standard tool
bar, you will not be able to map it. At least I have not found a way yet.
The Return function in the newer SpaceWare (2.3.0 Build 5) is equivalent to
the Enter key on your keyboard (not very useful in Inventor). If I'm wrong
someone please correct me. I would like to have the Return function from
the standard tool bar mapped to a Spaceball button too.
--
Dan Sponholz
Mercury Marine
"Dustin Conklin" wrote in message
news:B34BE0C4899080B3010A467E357CE706@in.WebX.maYIadrTaRb...
> Is there any way to assign a button on the spaceball to the return button
in
> Inventor
>
> Thanks
>
> Dustin
>
>
Sorry Dustin and Dan. Looks like Kent and I were going down the wrong path.
Much clearer after rereading the post!!
I have never used the "Return" button and you are correct, it doesn't appear
mappable? What is this for. Seems to give the same functionality is the
RMB>Finish Edit? I'm sure there is some added productivity that I'm missing
out on?
gcooper
"Dan Sponholz" wrote in message
news:2601262204365B73558ED5A9759067C3@in.WebX.maYIadrTaRb...
> I think if you are referring to the Return function on the standard tool
> bar, you will not be able to map it. At least I have not found a way yet.
> The Return function in the newer SpaceWare (2.3.0 Build 5) is equivalent
to
> the Enter key on your keyboard (not very useful in Inventor). If I'm
wrong
> someone please correct me. I would like to have the Return function from
> the standard tool bar mapped to a Spaceball button too.
>
> --
> Dan Sponholz
> Mercury Marine
>
>
> "Dustin Conklin" wrote in message
> news:B34BE0C4899080B3010A467E357CE706@in.WebX.maYIadrTaRb...
> > Is there any way to assign a button on the spaceball to the return
button
> in
> > Inventor
> >
> > Thanks
> >
> > Dustin
> >
> >
>
>
"Seems to give the same functionality is the
RMB>Finish Edit?"
Correct. The same button on the tool bar can
be used to return to the model in sketch mode, or return to a sub-assembly or
assembly from part edit mode (if activated from an assembly). No idea
why anyone would want to map the Enter key to a Spaceball button, which is what
appears to be the Return function in the SpaceWare drivers.
If you can access the "Return" throught a macro
then if you were to create the macro in the 3DxWare interface and assign it to a
button wouldn't that work.
"Seems to give the same functionality is the
RMB>Finish Edit?"
Correct. The same button on the tool bar
can be used to return to the model in sketch mode, or return to a sub-assembly
or assembly from part edit mode (if activated from an assembly). No
idea why anyone would want to map the Enter key to a Spaceball button, which
is what appears to be the Return function in the SpaceWare
drivers.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")