Kent, will this also work, RMB on hole in browser, select edit feature, ctrl
key/select hole center point/OK, select hole tool, enter new hole size/OK?
Thanks again, Bob
"Kent Keller" wrote in message
news:88CEF94E0ADD9B27E6DFB81B296523DC@in.WebX.maYIadrTaRb...
> Rmb on the hole in the browser, and edit. Hold the control key and select
> the one you want different to remove it from the rest that are selected.
Ok
> to finish the edit, then rmb on the sketch in the browser for the holes
and
> share it. Now add another hole using the point that you removed from the
> other hole set.
> --
> Kent Keller
> Member of the Autodesk Discussion Forum Moderator Program
>
> http://www.MyMcad.com/KWiK/Mcad.htm
>
> "Bob Johnson" wrote in message
> news:B32208D7A81F1BD4B66998F409C510C0@in.WebX.maYIadrTaRb...
> > Hi all, I have a sheetmetal panel. The panel has 4 holes in a pattern,
all
> > selected at the same time and with the same diameter. How can I change
the
> > diameter of only one of the holes? TIA, Bob
> >
> >
>
>