Inventor General Discussion

Reply
Member
mklassen78
Posts: 4
Registered: ‎01-09-2013
Message 1 of 17 (603 Views)
Accepted Solution

Rubber Track Design

603 Views, 16 Replies
01-09-2013 07:17 PM

Trying to model a track but i have it in more of a triangular orientation then an ovel like this sample picture. Any advice on how to pattern the tread and inner lug around any shape i desire? I have tried making an extrusion on one of the flat faces and then patterning it around but it keeps the lug in the same orientation and does not follow the contour nicely. Any advice for me

?Engineering-Rubber-Track.jpg

Valued Contributor
streharg
Posts: 68
Registered: ‎09-24-2012
Message 2 of 17 (591 Views)

Re: Rubber Track Design

01-09-2013 11:36 PM in reply to: mklassen78

You can do rectangular pattern in part enviroment along choosen curve, and set orientation to direction1. This should work.

 

I hope that's what you're looking for.

 

Greg

Factory design suite 2013 premium
Some old workstation ...
Fancy HP LCD
:smileyhappy:
*Expert Elite*
JDMather
Posts: 26,342
Registered: ‎04-20-2006
Message 3 of 17 (573 Views)

Re: Rubber Track Design

01-10-2013 04:42 AM in reply to: mklassen78

mklassen78 wrote:

Trying to model a track but i have it in more of a triangular orientation . Any advice for me?



See this document pg 16

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
mklassen78
Posts: 4
Registered: ‎01-09-2013
Message 4 of 17 (521 Views)

Re: Rubber Track Design

01-10-2013 06:19 PM in reply to: JDMather

Thank you for your replies! JDMather that does work to pattern around and i can get it to follow the contour i want but it leaves a gap between the "treads" as it is patterned around a curve. It does not keep tangent. Any solution to that?

*Expert Elite*
JDMather
Posts: 26,342
Registered: ‎04-20-2006
Message 5 of 17 (518 Views)

Re: Rubber Track Design

01-10-2013 06:55 PM in reply to: mklassen78

Attach your ipt file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
mklassen78
Posts: 4
Registered: ‎01-09-2013
Message 6 of 17 (508 Views)

Re: Rubber Track Design

01-10-2013 08:21 PM in reply to: mklassen78

Hope this helps more

*Expert Elite*
JDMather
Posts: 26,342
Registered: ‎04-20-2006
Message 7 of 17 (493 Views)

Re: Rubber Track Design

01-11-2013 04:47 AM in reply to: mklassen78

I don't see a pattern in the file you attached?

 

When I attach my solution the sketch for the tread will be on the XY plane.

The extrusion for the belt will initially be a surface body and then Thicken after the Pattern of the treads.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
mklassen78
Posts: 4
Registered: ‎01-09-2013
Message 8 of 17 (478 Views)

Re: Rubber Track Design

01-11-2013 08:07 AM in reply to: mklassen78

That is why im on this forum, It will not allow me to pattern and keep tangency, It just gives an error. The lugs i want to pattern are in the file though.

*Expert Elite*
JDMather
Posts: 26,342
Registered: ‎04-20-2006
Message 9 of 17 (474 Views)

Re: Rubber Track Design

01-11-2013 08:33 AM in reply to: mklassen78

mklassen78 wrote:

.... It just gives an error.


 

Post screen shot of error.

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
JDMather
Posts: 26,342
Registered: ‎04-20-2006
Message 10 of 17 (467 Views)

Re: Rubber Track Design

01-11-2013 09:07 AM in reply to: JDMather

I experimented with this one a bit more.

It is going to be a bit more work than I originally thought.

Because the tread cleats bend around the curves - my attempt would be with patterned-trimmed surfaces, thicken and trim again.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube