Inventor General Discussion

Inventor General Discussion

Reply
Member
fsfguy
Posts: 3
Registered: ‎03-24-2012
Message 1 of 7 (270 Views)
Accepted Solution

Reorient Triad

270 Views, 6 Replies
04-03-2012 07:50 PM

In a part file, how do I rotate the part around the x axis by 90 degrees so that the triad's y axis becomes alligned with what is now the z axis on the triad?

*Expert Elite*
JDMather
Posts: 26,529
Registered: ‎04-20-2006
Message 2 of 7 (253 Views)

Re: Reorient Triad

04-04-2012 04:55 AM in reply to: fsfguy

Right mouse button Redefine first sketch might be a solution.
Attach your file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
*Expert Elite*
Curtis_Waguespack
Posts: 2,878
Registered: ‎03-08-2006
Message 3 of 7 (243 Views)

Re: Reorient Triad

04-04-2012 07:53 AM in reply to: fsfguy

Hi fsfguy, 

 

In addition to JDMather's suggestion to redefine the first sketch, you can also use the Move Bodies tool to do this:

 

 

There's more on this technique at this link:

http://inventortrenches.blogspot.com/2011/06/change-origin-of-imported-model.html

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com




  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Member
fsfguy
Posts: 3
Registered: ‎03-24-2012
Message 4 of 7 (227 Views)

Re: Reorient Triad

04-05-2012 12:53 AM in reply to: fsfguy

Thanks!  I really appreciate the solutions!

 

@Curtis - I read the link you listed, if I want to move to a specific point on the part rather than the center of gravity, is there a way to get the coordinates for a specific point?  Btw, I really appreciate your book, it lives next to my computer.

*Expert Elite*
JDMather
Posts: 26,529
Registered: ‎04-20-2006
Message 5 of 7 (221 Views)

Re: Reorient Triad

04-05-2012 04:23 AM in reply to: fsfguy

Can you attach your file here.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
fsfguy
Posts: 3
Registered: ‎03-24-2012
Message 6 of 7 (205 Views)

Re: Reorient Triad

04-05-2012 08:20 AM in reply to: JDMather

File attached.

*Expert Elite*
Curtis_Waguespack
Posts: 2,878
Registered: ‎03-08-2006
Message 7 of 7 (201 Views)

Re: Reorient Triad

04-05-2012 08:32 AM in reply to: fsfguy

Hi fsfguy,

Thanks for supporting the book, I'm happy to hear that you find it useful.

 

Selecting a vertex with the Distance measure tool (Tools tab > Distance button)  should give you its location. In this image a 10mm cube is centered on the origin point, so measuring one of the corners gives the results shown. You coud also create a temporary sketch or workpoint to find the location of some point that does not have a selectable vertex.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com


 

Autodesk Inventor Measure Vertex Point.png

 

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.