Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Need help on inventor

6 REPLIES 6
Reply
Message 1 of 7
andrew0412
545 Views, 6 Replies

Need help on inventor

I have little experience with inventor and need some help with a certain problem. I am construcing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold.  I have attached the ipt file below. 

6 REPLIES 6
Message 2 of 7
JDMather
in reply to: andrew0412

I notice that your Sketch1 is not constrained.

I recommend you read this

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

 

Beginners should almost never use Delete Face -

you have a solid body and a surface body.

 

I recommend you start over using what you learned from the first attempt to simplify the second attempt (should be able to cut the number of features in half and don't use Delete Face.

 

Attach here at any step where you have difficulty in the new attempt.


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Message 3 of 7
andrew0412
in reply to: JDMather

Thanks I'll try that.

Message 4 of 7
JDMather
in reply to: andrew0412

Well I wouldn't mark as a solution until you get the final results.


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Message 5 of 7
Packers4life23
in reply to: JDMather

i need help on making a skateboard truck(axle) on inventor. i have tried everything. will someone please help give directions on making this difficult task.

Message 6 of 7
cwhetten
in reply to: Packers4life23

Since this thread has been marked as solved, you might not get the help you need.  You should create a new thread and post your questions there.

Message 7 of 7
JDMather
in reply to: Packers4life23

Attach your latest effort on the ipt file here.


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report