Inventor General Discussion

Reply
Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 1 of 12 (334 Views)
Accepted Solution

Missing Pattern Dialogue In Mould Design

334 Views, 11 Replies
11-04-2012 01:34 PM

Inventor Pro 2013 SP 1.1

 

Hi, I’m suing the Mould Design feature of Inventor Professional and need to have four cavities for this mould. When I try to use the pattern function nothing happens. I look at the Wiki help and it says that I have to enter values for X direction X distance etc, but this dialogue box does not appear.

 

How can I get the box to appear?

 

Thanks in Advance.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
*Expert Elite*
JDMather
Posts: 26,319
Registered: ‎04-20-2006
Message 2 of 12 (323 Views)

Re: Missing Pattern Dialogue In Mould Design

11-04-2012 05:54 PM in reply to: cmharb

Does it work when you do the Tutorial?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Employee
MingweiGao
Posts: 150
Registered: ‎08-04-2011
Message 3 of 12 (318 Views)

Re: Missing Pattern Dialogue In Mould Design

11-04-2012 06:22 PM in reply to: cmharb

Can you see Pattern command from the attached picture?  I also installed 2013 SP1.1 and have this command.

 

Thanks,

 


Mingwei Gao
Software QA Engineer
Inventor Quality Assurance Team

Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 4 of 12 (288 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 12:57 PM in reply to: MingweiGao

i do not see the Pattern box like that.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 5 of 12 (287 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 12:59 PM in reply to: JDMather

no have not done the Tutorial , I'Il do them now and see if it makes a differnace.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 6 of 12 (282 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 01:42 PM in reply to: JDMather

no,  i get to

 

http://wikihelp.autodesk.com/Inventor/enu/2013/Help/0126-Tutorial126/0807-Tooling_807/0826-Family_M8...

 

in the tutorial and there is not Pattern box, it might be off the screen.

 

Anyone know how to get it back?

 

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
*Expert Elite*
JDMather
Posts: 26,319
Registered: ‎04-20-2006
Message 7 of 12 (275 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 01:50 PM in reply to: cmharb

cmharb wrote:

... there is not Pattern box, it might be off the screen.

 

 


You don't see the dialog box... ... but do you see the tool on your screen?

 

Pattern.png

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 8 of 12 (268 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 02:02 PM in reply to: JDMather

yes the mouse is a selector and i can sellect a plastic part. But the box for editing the pattern details is missing.

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
*Expert Elite*
Curtis_Waguespack
Posts: 2,825
Registered: ‎03-08-2006
Message 9 of 12 (262 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 02:37 PM in reply to: cmharb

Hi cmharb,

 

How to get a missing dialog box back:

 

  • start the tool that exhibits the problem
  • press ALT + Space-bar on the keyboard 
  • then press the M key (M for move)
This is what happens off screen

 

  • then Immediately press any of the arrow keys on the keyboard
  • finally, move your mouse around and the dialog box will now be attached to your cursor allowing you to drag it back on screen, just click to drop it in place.

http://inventortrenches.blogspot.com/2011/01/missing-dialog-box.html

 

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





Active Contributor
cmharb
Posts: 53
Registered: ‎05-20-2008
Message 10 of 12 (256 Views)

Re: Missing Pattern Dialogue In Mould Design

11-06-2012 03:02 PM in reply to: cmharb

Capture.PNG

w7u-64sp1,iv14,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube