Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
Hello Everyone, I am making this 3d Model out of Sheet metal but I am having a problem finishing it. On the very bottom of the part, I want the red and the green surface to be parallel to the Y-axis on both sides. The sketch "Desired Geometry" shows what I am trying to make. I tried using corner seam but it gives me error. The distance between the two red surface can vary. Any suggessions on how this shape can be acheived which will give me a correct flat pattern too.
Why not just create as a face? Maybe I'm missing what you're wanting to do. Take a look at what I did here and tell me if this is what you were going for.
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")