Inventor General Discussion

Reply
Active Contributor
sebgonz
Posts: 28
Registered: ‎03-14-2011
Message 1 of 54 (3,195 Views)
Accepted Solution

Inventor 2014 DWG will not Check In to Vault

3195 Views, 53 Replies
05-29-2013 07:23 AM

I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.

 

I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang. Any help would be greatly appreciated.

 

My PC Config:

Windows 7 Professional 64-bit

Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz

16 GB RAM

Dual AMD Radeon HD 6450

 

I'm running Product Design Suite 2014

My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450

Running Product Design Suite 2014
Mentor
jddickson
Posts: 180
Registered: ‎10-07-2011
Message 2 of 54 (3,174 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 08:31 AM in reply to: sebgonz

Do you have any iLogic rules in your drawings? If you do try suppressing them before checking the drawings into vault. If it works after suppressing the rules then you can narrow it down to the code that is interfering with checking it in.

 

Not sure if this is the problem but I hope this helps.

Active Contributor
sebgonz
Posts: 28
Registered: ‎03-14-2011
Message 3 of 54 (3,170 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 08:43 AM in reply to: jddickson

Thanks for the reply. I don't have any iLogic in the drawings. Actually, I don't think I have any iLogic in any parts that I'm currently experiencing this with.

 

I did forget to mention that this is happening on 3 different systems. I'm not the only user here experiencing it.

My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450

Running Product Design Suite 2014
Contributor
kgadgil
Posts: 12
Registered: ‎05-06-2013
Message 4 of 54 (3,163 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 08:52 AM in reply to: sebgonz
Spoiler
 

Is that .DWG file created directly from Inventor 3D assembly? Try creating from from .idw file

Active Contributor
sebgonz
Posts: 28
Registered: ‎03-14-2011
Message 5 of 54 (3,161 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 09:00 AM in reply to: kgadgil

I'm not sure I understand what you mean by "created directly from Inventor 3D assembly". We create the dwg separately and place our views into it.

My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450

Running Product Design Suite 2014
Mentor
jddickson
Posts: 180
Registered: ‎10-07-2011
Message 6 of 54 (3,153 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 09:10 AM in reply to: sebgonz

I noticed that there is a Logo on your drawing. Do you know how that is inserted into the drawing? If it’s a linked picture in Vault it might cause some problems depending on how it’s checked out or checked in. 

Active Contributor
sebgonz
Posts: 28
Registered: ‎03-14-2011
Message 7 of 54 (3,150 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 09:23 AM in reply to: jddickson

It is embedded. It has not caused any issues in previous releases.

 

I've also created this video showing exactly what I'm doing when I get the error. http://youtu.be/njbztuGn4TI

 

Additionally, after I manage to get out of the frozen screen, if I can without having to kill the process, I get this error:
"The server returned the following information: The underlying connection was closed: A connection that was expected to be kept alive was closed by the server."

My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450

Running Product Design Suite 2014
Distinguished Mentor
swhite
Posts: 531
Registered: ‎11-08-2012
Message 8 of 54 (3,146 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 09:36 AM in reply to: sebgonz

I have had this issue before, it is frustrating as hell. You need to open your main assembly, go to the vault view on the browser instead of the model view. Expand every single subassembly until you find the part or parts that are red and check it out. It will most likely be a library file that was converted from a previous release that did not take properly. And I expect everytime you open this assembly and say yes to replace from vault, the same thing will occur unless you open that library file directly and save it with a library modification project path.

Steven White
Lee C. Moore, Inc.
www.lcm-wci.com
Inventor 2011
Intel Dual Xeon E31225 @ 3.1 GHz CPU
16 GB RAM
NVIDIA Quadro 600 GPU
Windows 7 - 64 Bit
Mentor
jddickson
Posts: 180
Registered: ‎10-07-2011
Message 9 of 54 (3,143 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 09:41 AM in reply to: sebgonz

I don’t know if this will make any difference:

 

  1. In Vault go to options under the tools tab
  2. Check the show hidden files tab
  3. Find your file in Vault. There should be a .DWF file with the same name.
  4. Delete the .DWF file.
  5. Try to check out the DWG file and check it back in.
  6. Turn off the show hidden files tab

 

Hope this helps

Is this the only file you are having problems with?

it
New Member
it
Posts: 1
Registered: ‎06-10-2010
Message 10 of 54 (3,132 Views)

Re: Inventor 2014 DWG will not Check In to Vault

05-29-2013 10:27 AM in reply to: jddickson

I just tried what you suggested. I showed hidden files, deleted the dwf, and tried checking in the dwg. That still hasn't fixed the problem. It happens with any dwg I try to check in. Even brand new dwgs created in Inventor 2014.

 

I'm starting to think that it may have something to do with the vault server installation. I have no theory as to why, but where it's happening with 3 different systems, it makes more sense to me.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube