IDW Reference View Dud

[Anonymous]

HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which has two
views of an IAM with three extra Reference parts. In r/h view the parts are
clearly shown as outlined, in l/h view the standard parts visibility has
been turned off, but there is a clear cut off of the referenced parts in
bottom of view?

--
Laurence,

Power is nothing without Control
---

[Anonymous]

Amazing what Inventor can think up to confound us, eh? Couldn't be an empty
view covering that up, I don't guess, eh?
~Larry

"Laurence Yeandle" wrote in message
news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which has two
> views of an IAM with three extra Reference parts. In r/h view the parts
are
> clearly shown as outlined, in l/h view the standard parts visibility has
> been turned off, but there is a clear cut off of the referenced parts in
> bottom of view?
>
> --
> Laurence,
>
> Power is nothing without Control
> ---
>
>
>

[Anonymous]

Thanks Larry but no other view on page, will try other IAM file to see if
its not isolated.

--
Laurence,

Power is nothing without Control
---


"Larry Caldwell" wrote in message
news:EC7537BD1501B0ED5A0E61199024E6EE@in.WebX.maYIadrTaRb...
> Amazing what Inventor can think up to confound us, eh? Couldn't be an
empty
> view covering that up, I don't guess, eh?
> ~Larry
>
> "Laurence Yeandle" wrote in message
> news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> > HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which has
two
> > views of an IAM with three extra Reference parts. In r/h view the parts
> are
> > clearly shown as outlined, in l/h view the standard parts visibility has
> > been turned off, but there is a clear cut off of the referenced parts in
> > bottom of view?
> >
> > --
> > Laurence,
> >
> > Power is nothing without Control
> > ---
> >
> >
> >
>
>

[Anonymous]

Didn't think so, but it does look like something's covering it up doesn't
it. If you want to post it I could see if it does the same over here.
~Larry

"Laurence Yeandle" wrote in message
news:AE18B715B64A47D1B9494EF4802D03A7@in.WebX.maYIadrTaRb...
> Thanks Larry but no other view on page, will try other IAM file to see if
> its not isolated.
>
> --
> Laurence,
>
> Power is nothing without Control
> ---
>
>
> "Larry Caldwell" wrote in message
> news:EC7537BD1501B0ED5A0E61199024E6EE@in.WebX.maYIadrTaRb...
> > Amazing what Inventor can think up to confound us, eh? Couldn't be an
> empty
> > view covering that up, I don't guess, eh?
> > ~Larry
> >
> > "Laurence Yeandle" wrote in message
> > news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> > > HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which has
> two
> > > views of an IAM with three extra Reference parts. In r/h view the
parts
> > are
> > > clearly shown as outlined, in l/h view the standard parts visibility
has
> > > been turned off, but there is a clear cut off of the referenced parts
in
> > > bottom of view?
> > >
> > > --
> > > Laurence,
> > >
> > > Power is nothing without Control
> > > ---
> > >
> > >
> > >
> >
> >
>
>

[Anonymous]

Larry it was a migrated 5.3 file, tried it with native 6.0 and same result!
Open a IAM make a part reference via properties save. Open an IDW place a
base view-current. Should see reference part outlined, show contents in
browser and turn off visibility of a part partly obscured by the ref part
and what do you see? Precise does not affect the result. Anybody confirm
this so I can report it to Adesk, ta.

--
Laurence,

Power is nothing without Control
---


"Larry Caldwell" wrote in message
news:F174DA8627677E19DA8DD5D0BC7883E4@in.WebX.maYIadrTaRb...
> Didn't think so, but it does look like something's covering it up doesn't
> it. If you want to post it I could see if it does the same over here.
> ~Larry
>
> "Laurence Yeandle" wrote in message
> news:AE18B715B64A47D1B9494EF4802D03A7@in.WebX.maYIadrTaRb...
> > Thanks Larry but no other view on page, will try other IAM file to see
if
> > its not isolated.
> >
> > --
> > Laurence,
> >
> > Power is nothing without Control
> > ---
> >
> >
> > "Larry Caldwell" wrote in message
> > news:EC7537BD1501B0ED5A0E61199024E6EE@in.WebX.maYIadrTaRb...
> > > Amazing what Inventor can think up to confound us, eh? Couldn't be an
> > empty
> > > view covering that up, I don't guess, eh?
> > > ~Larry
> > >
> > > "Laurence Yeandle" wrote in message
> > > news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> > > > HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which
has
> > two
> > > > views of an IAM with three extra Reference parts. In r/h view the
> parts
> > > are
> > > > clearly shown as outlined, in l/h view the standard parts visibility
> has
> > > > been turned off, but there is a clear cut off of the referenced
parts
> in
> > > > bottom of view?
> > > >
> > > > --
> > > > Laurence,
> > > >
> > > > Power is nothing without Control
> > > > ---
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Anonymous]

Put mine in CF under yours. Weird thing that.
~Larry

"Laurence Yeandle" wrote in message
news:B30F75125A49D9F647E19417FC29A926@in.WebX.maYIadrTaRb...
> Larry it was a migrated 5.3 file, tried it with native 6.0 and same
result!
> Open a IAM make a part reference via properties save. Open an IDW place a
> base view-current. Should see reference part outlined, show contents in
> browser and turn off visibility of a part partly obscured by the ref part
> and what do you see? Precise does not affect the result. Anybody confirm
> this so I can report it to Adesk, ta.
>
> --
> Laurence,
>
> Power is nothing without Control
> ---
>
>
> "Larry Caldwell" wrote in message
> news:F174DA8627677E19DA8DD5D0BC7883E4@in.WebX.maYIadrTaRb...
> > Didn't think so, but it does look like something's covering it up
doesn't
> > it. If you want to post it I could see if it does the same over here.
> > ~Larry
> >
> > "Laurence Yeandle" wrote in message
> > news:AE18B715B64A47D1B9494EF4802D03A7@in.WebX.maYIadrTaRb...
> > > Thanks Larry but no other view on page, will try other IAM file to see
> if
> > > its not isolated.
> > >
> > > --
> > > Laurence,
> > >
> > > Power is nothing without Control
> > > ---
> > >
> > >
> > > "Larry Caldwell" wrote in message
> > > news:EC7537BD1501B0ED5A0E61199024E6EE@in.WebX.maYIadrTaRb...
> > > > Amazing what Inventor can think up to confound us, eh? Couldn't be
an
> > > empty
> > > > view covering that up, I don't guess, eh?
> > > > ~Larry
> > > >
> > > > "Laurence Yeandle" wrote in message
> > > > news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> > > > > HI All, In CF there's a screen shot of an IDW "ENG DUD IDW" which
> has
> > > two
> > > > > views of an IAM with three extra Reference parts. In r/h view the
> > parts
> > > > are
> > > > > clearly shown as outlined, in l/h view the standard parts
visibility
> > has
> > > > > been turned off, but there is a clear cut off of the referenced
> parts
> > in
> > > > > bottom of view?
> > > > >
> > > > > --
> > > > > Laurence,
> > > > >
> > > > > Power is nothing without Control
> > > > > ---
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Anonymous]

OK Larry I'll send a file on up to the big men upstairs, either this is a
little used method or I am doing something non standard.

--
Laurence,

Power is nothing without Control
---


"Larry Caldwell" wrote in message
news:8CFCFF5ECF7A6ECE5307AAE44F7E281F@in.WebX.maYIadrTaRb...
> Put mine in CF under yours. Weird thing that.
> ~Larry
>
> "Laurence Yeandle" wrote in message
> news:B30F75125A49D9F647E19417FC29A926@in.WebX.maYIadrTaRb...
> > Larry it was a migrated 5.3 file, tried it with native 6.0 and same
> result!
> > Open a IAM make a part reference via properties save. Open an IDW place
a
> > base view-current. Should see reference part outlined, show contents in
> > browser and turn off visibility of a part partly obscured by the ref
part
> > and what do you see? Precise does not affect the result. Anybody confirm
> > this so I can report it to Adesk, ta.
> >
> > --
> > Laurence,
> >
> > Power is nothing without Control
> > ---
> >
> >
> > "Larry Caldwell" wrote in message
> > news:F174DA8627677E19DA8DD5D0BC7883E4@in.WebX.maYIadrTaRb...
> > > Didn't think so, but it does look like something's covering it up
> doesn't
> > > it. If you want to post it I could see if it does the same over here.
> > > ~Larry
> > >
> > > "Laurence Yeandle" wrote in message
> > > news:AE18B715B64A47D1B9494EF4802D03A7@in.WebX.maYIadrTaRb...
> > > > Thanks Larry but no other view on page, will try other IAM file to
see
> > if
> > > > its not isolated.
> > > >
> > > > --
> > > > Laurence,
> > > >
> > > > Power is nothing without Control
> > > > ---
> > > >
> > > >
> > > > "Larry Caldwell" wrote in message
> > > > news:EC7537BD1501B0ED5A0E61199024E6EE@in.WebX.maYIadrTaRb...
> > > > > Amazing what Inventor can think up to confound us, eh? Couldn't be
> an
> > > > empty
> > > > > view covering that up, I don't guess, eh?
> > > > > ~Larry
> > > > >
> > > > > "Laurence Yeandle" wrote in message
> > > > > news:1FD403706FD2871E02CE64E3D1F0A236@in.WebX.maYIadrTaRb...
> > > > > > HI All, In CF there's a screen shot of an IDW "ENG DUD IDW"
which
> > has
> > > > two
> > > > > > views of an IAM with three extra Reference parts. In r/h view
the
> > > parts
> > > > > are
> > > > > > clearly shown as outlined, in l/h view the standard parts
> visibility
> > > has
> > > > > > been turned off, but there is a clear cut off of the referenced
> > parts
> > > in
> > > > > > bottom of view?
> > > > > >
> > > > > > --
> > > > > > Laurence,
> > > > > >
> > > > > > Power is nothing without Control
> > > > > > ---
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>