Inventor General Discussion

Reply
Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 1 of 14 (350 Views)
Accepted Solution

I cannot do anything with this problem. Help me please.

350 Views, 13 Replies
07-12-2013 03:04 AM

I was drawing rectangles (they were green) on a wide box (I saw all of them very well) and then I extruded one of them. As result - other rectangles disapeared. When I was trying to solve this(don't remember how), I made terrible mistake. All rectangles appeared, but then they were yellow. So now I cannot do anything with them, even delete. Help!

*Expert Elite*
JDMather
Posts: 26,352
Registered: ‎04-20-2006
Message 2 of 14 (338 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 03:40 AM in reply to: vlad.kuzik.95

Attach the ipt file here that exhibits this behavior.

 

Sounds like all you need to do was right  click on the sketch and turn on Visibility.

Sounds like you created a new sketch and Project Geometry.

 

Have you gone though the Help>Learning Tools>Tutorials and Skillbuilders?

These http://inventortrenches.blogspot.com/p/inventor-tutorials.html

This http://home.pct.edu/~jmather/SkillsUSA%20University.pdf

 

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Member
petereggington
Posts: 4
Registered: ‎07-12-2013
Message 3 of 14 (332 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 03:54 AM in reply to: vlad.kuzik.95

You have created more than one profile and when you have extruded the first the others will have disappeared. Right click on the first sketch in the 'Model Browser' and select 'share sketch'. You can then extrude the other profiles you have created.

 

Hope this helps!

Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 4 of 14 (311 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 04:31 AM in reply to: petereggington

This doesn't help.  But thanks.

Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 5 of 14 (308 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 04:43 AM in reply to: JDMather

It doesn't work. I don't see any changes. It's time to read WikiHelp.

*Expert Elite*
cbenner
Posts: 3,184
Registered: ‎04-06-2010
Message 6 of 14 (305 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 04:45 AM in reply to: vlad.kuzik.95

As mentioned above, please post your part file on here.  One of us will be able to look at it and help you figure out the problem.

ChrisB

ADSK_Expert_Elite_Icon_S_Color_Blk.png

Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Thank you! :smileyhappy:

http://cbennertipstricks.blogspot.com/


   

Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 7 of 14 (298 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 04:57 AM in reply to: cbenner
*Expert Elite*
karthur1
Posts: 4,165
Registered: ‎04-27-2005
Message 8 of 14 (285 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 05:17 AM in reply to: vlad.kuzik.95

There are many sketches in this part.  There are several ways to turn off the visibility of the sketches if that is what you are wanting to do.

Tip:

To find the sketch in the browser, right click on an element in chose "Find in Browser".  then right click on the sketch name in the browser and uncheck "Visibility.

 

You can turn off all sketches in the part from View>Object Visibility.  Uncheck 2D and 3D sketches here.

 

Post back if you need more help.

 

Kirk

Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 9 of 14 (279 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 05:25 AM in reply to: karthur1

Thanks. But where I can find my rectangles now.

Contributor
vlad.kuzik.95
Posts: 16
Registered: ‎07-11-2013
Message 10 of 14 (270 Views)

Re: I cannot do anything with this problem. Help me please.

07-12-2013 05:52 AM in reply to: karthur1

When I close this part and open beck, these yellow rectangles apeared again. How can I protect?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube