Inventor General Discussion

Reply
Contributor
domel123
Posts: 17
Registered: ‎03-16-2010
Message 1 of 8 (355 Views)

How to make it work??

355 Views, 7 Replies
11-25-2010 08:18 AM

Hello. Please check my project. I use szkic.ipt to control the shape of the container.

Please tell me why it all goes wrong when I change it and update? I loose references every single time.

If I suppress Klapa Gorna.ipt everything goes smooth.

Any idea?

 

Dominik

INV 2011 Win 7 32 bit

*Expert Elite*
JDMather
Posts: 26,307
Registered: ‎04-20-2006
Message 2 of 8 (341 Views)

Re: How to make it work??

11-25-2010 10:26 AM in reply to: domel123

domel123 wrote:

Any idea?


Here is an idea - fully constrain the sketch so that you will know how it will behave.

This is usually covered in the 1st hour of Inventor training.
You might go through this document.

http://home.pct.edu/~jmather/skillsusa%20university.pdf

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
domel123
Posts: 17
Registered: ‎03-16-2010
Message 3 of 8 (336 Views)

Re: How to make it work??

11-25-2010 10:41 AM in reply to: JDMather

Which sketch? szkic.ipt  is not adaptive. Is it necessary to fully constrain sketches that are not adaptive?

Contributor
domel123
Posts: 17
Registered: ‎03-16-2010
Message 4 of 8 (332 Views)

Re: How to make it work??

11-25-2010 10:51 AM in reply to: domel123

I did, but it doesn't help.

*Expert Elite*
JDMather
Posts: 26,307
Registered: ‎04-20-2006
Message 5 of 8 (327 Views)

Re: How to make it work??

11-25-2010 11:09 AM in reply to: domel123

Where is the Excel spreadsheet - you didn't include it in your attachment?

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Contributor
domel123
Posts: 17
Registered: ‎03-16-2010
Message 6 of 8 (307 Views)

Re: How to make it work??

11-25-2010 12:56 PM in reply to: JDMather

You are right, here it is again

Contributor
domel123
Posts: 17
Registered: ‎03-16-2010
Message 7 of 8 (284 Views)

Re: How to make it work??

11-25-2010 03:06 PM in reply to: domel123

I did not include the assembly.

Now it is 100% complete.

*Expert Elite*
JDMather
Posts: 26,307
Registered: ‎04-20-2006
Message 8 of 8 (242 Views)

Re: How to make it work??

11-26-2010 05:07 AM in reply to: domel123

domel123 wrote:

Now it is 100% complete.


If I try to walk you through doing this correctly are you going to stick around to the end solution?
(I ask this question because I see so many things wrong and often when I start walking someone through a solution they want to take a bunch of short-cuts rather than make it right.)

 

You might start by reading this document http://home.pct.edu/~jmather/skillsusa%20university.pdf

 

1. You have posted your files here 3 times and the master sketch in Szkic.ipt is not constrained in all 3, even though that is the most basic of techniques in using a parametric modeling program.

2. I would not leave units undefined in a spreadsheet.

3. It looks to me like you are adding uneeded compexity feature tree (see attached image yours vs mine).

 

If you want me to walk you through how I would do the part, start by constraining your master sketch and then indicate you would like for me to continue.  Otherwise, I'm sure someone else will be happy to jump in here and offer shortcut solutions.  (actually if you look at my attachment I think my solution would be a real shortcut compared to yours, looks to me like you are doing wayyyy too much work)

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube