Inventor General Discussion

New Member
Posts: 1
Registered: ‎10-08-2012
Message 1 of 3 (199 Views)
Accepted Solution

How to assemble a manufactured pipe nozzle

199 Views, 2 Replies
10-08-2012 02:54 PM



I am struggling with a relatively simple exercise in inventor. I would like to assemble two pipe segments intersecting one another to form a pressure part nozzle, as shown below:Nozzel Assembly

I cannot seem to find a relatively easy method of doing this. I've tried pipe & tube routing but it doesn't seem to have this functionality. Apart from actually modeling the nozzle to have the contour shown above, how would one achieve this easily?


Pipe & tube routing allows one to align these two segments of pipe, but it doesn't contour the nozzle pipe segment to the circumference of the pressure part segment.


Any help with this will be much appreciated.


Thanks so much.



Valued Contributor
Posts: 65
Registered: ‎06-28-2011
Message 2 of 3 (188 Views)

Re: How to assemble a manufactured pipe nozzle

10-09-2012 12:27 AM in reply to: A_G_M

Providing that the hole in the main body you wish to align the pipe to has been created properly, you should be able to mate the axes together - hole axis and stub pipe body axis. You should also be able to mate the perpendicular axes as well - mate the arc cut (will automatically select an imaginary axis) on the stub pipe to the cylinder axis of the larger component body.


You may also want to place a directional or angular constraint to set the position correctly, but only do this if you don't get the desired outcome.

Please click "Accept as Solution" if this response answers your question.
Autodesk Inventor Professional 2012
Windows 7 Professional, 64-bit (Service Pack 1)
Intel(R) Core(TM i7-2600 CPU, Quadro 2000 graphics card, 8G RAM
*Expert Elite*
Posts: 26,317
Registered: ‎04-20-2006
Message 3 of 3 (176 Views)

Re: How to assemble a manufactured pipe nozzle

10-09-2012 04:26 AM in reply to: PhilSaw

You might also need workpoints created at the apparent intersection of the pipe surface and axis.

Please mark this response as "Accept as Solution" if it answers your question.
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community

Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor