Inventor General Discussion

Reply
Contributor
mmbguide
Posts: 13
Registered: ‎04-09-2012
Message 1 of 10 (9,561 Views)

Getting isometric drawing from pipe model

9561 Views, 9 Replies
04-09-2012 11:46 AM

hi

 

how can i create an isometric drawing from pipe moldel.

*Expert Elite*
Cadmanto
Posts: 3,198
Registered: ‎12-07-2011
Message 2 of 10 (9,535 Views)

Re: Getting isometric drawing from pipe model

04-10-2012 04:07 AM in reply to: mmbguide

If you are talking about a view in a drawing you can place your view and while you are in the "Drawing View"

dialog window you can select this command to orientate your model to get the correct view you need.

view.JPG

If this isn't what you are tlaking about then a little more detail would help.

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Contributor
mmbguide
Posts: 13
Registered: ‎04-09-2012
Message 3 of 10 (9,513 Views)

Re: Getting isometric drawing from pipe model

04-10-2012 09:56 AM in reply to: Cadmanto

please visiti this address

http://labs.autodesk.com/utilities/isometrics/

 

sample.png

i want to get out put from inventor like this sample. but how? 

Contributor
mmbguide
Posts: 13
Registered: ‎04-09-2012
Message 4 of 10 (9,476 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 12:41 AM in reply to: mmbguide

please help me that's urgent

*Expert Elite*
Cadmanto
Posts: 3,198
Registered: ‎12-07-2011
Message 5 of 10 (9,473 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 03:50 AM in reply to: mmbguide

It is hard to see the image, but from what I can make out it looks like all you are trying to do is

make an isometric view.  If that is the case then use the button I showed you in my last posting

and it will then lead you to your model where you will spin the model to the orientation you want.

then when you select done, that orientation will be represented on your drawing.

I couldn't tell if it was exploded.  If you need to do that then you will need to create an .ipn file.

Take a look at this link.

http://forums.autodesk.com/t5/Autodesk-Inventor/Exploded-Views/td-p/3309155

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

*Expert Elite*
Mark_Flayler
Posts: 1,465
Registered: ‎07-30-2007
Message 6 of 10 (9,467 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 06:30 AM in reply to: mmbguide

Inventor will export a PCF file, but it will not create the piping isometric (not the same as what some drafters consider an isometric view).

 

In Inventor you will have to use traditional drafting tools to get your isometric, there is no magic piping ISO button.

Mark Flayler Application Engineer - Manufacturing Solutions Division
IMAGINiT's Manufacturing Solutions Blog:
http://blogs.rand.com/manufacturing/
*Expert Elite*
Mark_Flayler
Posts: 1,465
Registered: ‎07-30-2007
Message 7 of 10 (9,466 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 06:31 AM in reply to: Mark_Flayler

You can take your PCF to that labs technology though and it will load it up.

Mark Flayler Application Engineer - Manufacturing Solutions Division
IMAGINiT's Manufacturing Solutions Blog:
http://blogs.rand.com/manufacturing/
*Expert Elite*
Mark_Flayler
Posts: 1,465
Registered: ‎07-30-2007
Message 8 of 10 (9,465 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 06:35 AM in reply to: Mark_Flayler

Activate a Tube & Pipe Assembly and then use ISOGEN output.

 

ISO PCF output.png

Mark Flayler Application Engineer - Manufacturing Solutions Division
IMAGINiT's Manufacturing Solutions Blog:
http://blogs.rand.com/manufacturing/
Contributor
mmbguide
Posts: 13
Registered: ‎04-09-2012
Message 9 of 10 (9,452 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 03:14 PM in reply to: Cadmanto

i mean this kind of output for workshop use

Isometric 1.jpg

Isometric 3.jpg 

*Expert Elite*
Mark_Flayler
Posts: 1,465
Registered: ‎07-30-2007
Message 10 of 10 (9,448 Views)

Re: Getting isometric drawing from pipe model

04-14-2012 04:13 PM in reply to: mmbguide

If you tried the PCF output from Inventor and then put it through the Online WS converter and that was not enough for you then you are out of luck.  You will need to use a different program to complete the piping isometrics that you want or do some tedious work in Inventor.

Mark Flayler Application Engineer - Manufacturing Solutions Division
IMAGINiT's Manufacturing Solutions Blog:
http://blogs.rand.com/manufacturing/

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube