Inventor General Discussion

Reply
New Member
krcastillo
Posts: 1
Registered: ‎10-17-2012
Message 1 of 5 (410 Views)

Generating an Elbow on a metal part drawing

410 Views, 4 Replies
10-17-2012 10:33 PM

I would like to ask , how to create the elbow part of a metal type  ( actually a  J-shape Bolt  Threaded material)  .

I had finished  the  straight part  by  simply revolving my required profile. then i was to  draw the  elbow part but "sweep" doesnt  work  out

*Pro
sbixler
Posts: 1,870
Registered: ‎09-15-2003
Message 2 of 5 (395 Views)

Re: Generating an Elbow on a metal part drawing

10-18-2012 04:34 AM in reply to: krcastillo

Inventor version?  Post the file here.

 

In what way does Sweep not work out?  Have you tried using the Bend Part tool?

*Expert Elite*
mcgyvr
Posts: 6,720
Registered: ‎12-01-2004
Message 3 of 5 (380 Views)

Re: Generating an Elbow on a metal part drawing

10-18-2012 10:26 AM in reply to: sbixler

If all you want is a "j bolt" you need 2 sketches.. 1 is just a "J" shaped single line sketch.. Then the other sketch is just a circle starting on a plane perpendicular to the first sketch start or end point. Then sweep and voila a "J"

see attached (done with INV 2012)

Did you find this reply helpful ? If so please use the Accept as Solution or Kudos button below.

Down with IDW/DWG files..... Long live 3D PMI... Hurry it up already..
-------------------------------------------------------------------------------------
2015 Product Design Suite Ultimate
Windows 7 64 bit
Core i7 4820k processor (OC'd to 4.4Ghz), Nvidia GTX 770, 16G RAM


Active Contributor
hagiographa
Posts: 36
Registered: ‎12-13-2010
Message 4 of 5 (345 Views)

Re: Generating an Elbow on a metal part drawing

10-18-2012 08:46 PM in reply to: mcgyvr

Is this what you want?

J-Bolt.png

I'm not sure how you'll get the nut past the bend?!

Valued Contributor
PhilSaw
Posts: 65
Registered: ‎06-28-2011
Message 5 of 5 (335 Views)

Re: Generating an Elbow on a metal part drawing

10-19-2012 01:55 AM in reply to: hagiographa

 A Google search on "J Bolts" shows the thread on the straight part only - so no, that isn't what the OP is after.

 

http://www.google.co.uk/imgres?q=J+BOLT&um=1&hl=en&safe=active&sa=N&biw=1053&bih=494&tbm=isch&tbnid=...

Please click "Accept as Solution" if this response answers your question.
-------------------------------------------------------------------------------------
Autodesk Inventor Professional 2012
Windows 7 Professional, 64-bit (Service Pack 1)
Intel(R) Core(TM i7-2600 CPU, Quadro 2000 graphics card, 8G RAM

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube