Inventor General Discussion

Reply
Active Member
domtown
Posts: 8
Registered: ‎10-27-2012
Message 1 of 6 (327 Views)
Accepted Solution

Frame Generator - Notching

327 Views, 5 Replies
11-05-2012 10:22 AM

When using the notching command in frame generator, sometimes the notched material does not go away, but sometimes it does (see the picture). The red circle on the left shows a properly notched member, and the red circle on the right shows a notched member where the material is not actually removed. Does anyone know why this is occuring? Thank you

 

 

 

Notching.jpg

 

 

Autodesk Inventor Professional 2013

Active Member
domtown
Posts: 8
Registered: ‎10-27-2012
Message 2 of 6 (326 Views)

Re: Frame Generator - Notching

11-05-2012 10:28 AM in reply to: domtown

Here's another picture where a tube notched correctly to member, but incorrectly to another member.Notching 2.jpg

 

Any help would be greatly appreciated.

*Expert Elite*
JDMather
Posts: 26,282
Registered: ‎04-20-2006
Message 3 of 6 (323 Views)

Re: Frame Generator - Notching

11-05-2012 10:31 AM in reply to: domtown

Rather than use the Notch tool you could edit the part to be trimmed within the context of the assembly and Copy Object the Surfaces to use for trimming from the other parts.  Then Sculpt or Split.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
domtown
Posts: 8
Registered: ‎10-27-2012
Message 4 of 6 (318 Views)

Re: Frame Generator - Notching

11-05-2012 10:40 AM in reply to: JDMather

I will see if I have better luck doing it your way. Thanks for the response.

*Expert Elite*
JDMather
Posts: 26,282
Registered: ‎04-20-2006
Message 5 of 6 (313 Views)

Re: Frame Generator - Notching

11-05-2012 10:55 AM in reply to: domtown

domtown wrote:

... better luck....



Well it will work, just more work.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2015 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Active Member
domtown
Posts: 8
Registered: ‎10-27-2012
Message 6 of 6 (297 Views)

Re: Frame Generator - Notching

11-05-2012 12:11 PM in reply to: JDMather

After much research, I have found that my problem is I am trying to notch to a curved tube member, which Inventor apparently does not like.

 

After reading many threads on the subject (most of which you had provided solutions to :smileyhappy:) I realized that I could use the notch command as I previously did, and then edit each member and use 3D Model>Surface>Delete Face>Select Lump or Void - and I was able to delete the leftover material from the notches.

 

Thank you for your assistance!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube