Inventor General Discussion

Reply
Distinguished Contributor
Anthony
Posts: 387
Registered: ‎10-03-2011
Message 1 of 9 (684 Views)

Exporting BOM Lists

684 Views, 8 Replies
03-22-2012 04:37 AM

It would be good if there was an option to export a bill of materials in word format (.doc) instead of just Excel, is there a way to do this in Inventor 2012 ?

Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
*Expert Elite*
Cadmanto
Posts: 3,192
Registered: ‎12-07-2011
Message 2 of 9 (680 Views)

Re: Exporting BOM Lists

03-22-2012 05:01 AM in reply to: Anthony

Anthony,

You can RC on the BOM and select export.  Then under the file types there is a .txt file

type.  These can be opened up directly inside of Word.

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Distinguished Contributor
Anthony
Posts: 387
Registered: ‎10-03-2011
Message 3 of 9 (674 Views)

Re: Exporting BOM Lists

03-22-2012 05:11 AM in reply to: Cadmanto

Thanks yes I did see that option, it would be even better if there was a direct export to .doc option instead of this so that when the .txt file appears in Word there is no need to 'customize' the data to view correctly in Word. Maybe one for Autodesk to think about in the next release.

Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
*Expert Elite*
PaulMunford
Posts: 898
Registered: ‎11-13-2006
Message 4 of 9 (665 Views)

Re: Exporting BOM Lists

03-22-2012 06:36 AM in reply to: Anthony

You can't do it directly, but the option is available 'Under the hood':

 

Check out this example from Brian Eakins:

http://modthemachine.typepad.com/my_weblog/2010/02/parts-list-with-thumbnail-image.html

The CAD Setter Out Blog @CadSetterOut

Inventor Surfacing | AutoCAD | CAD Standards
 
Please use the Mark Solutions! Accept as Solution or Give Kudos! Kudos functions - Thank you!
*Expert Elite*
Cadmanto
Posts: 3,192
Registered: ‎12-07-2011
Message 5 of 9 (653 Views)

Re: Exporting BOM Lists

03-22-2012 12:43 PM in reply to: Anthony

At least there is an option.  Might be your only one.

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Distinguished Contributor
Anthony
Posts: 387
Registered: ‎10-03-2011
Message 6 of 9 (640 Views)

Re: Exporting BOM Lists

03-23-2012 04:20 AM in reply to: PaulMunford

I have another question: I have renamed some parts in the BOM list so as to enabel them to be grouped, the problem is I loose the thumbnial when doing this, can you advise on how to retain the thumbnail when renaming and grouping parts ?

Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
*Expert Elite*
PaulMunford
Posts: 898
Registered: ‎11-13-2006
Message 7 of 9 (630 Views)

Re: Exporting BOM Lists

03-23-2012 03:12 PM in reply to: Anthony

That makes sense to me. The Thumbnail comes from the part file. If you roll up two or more parts, how will Inventor know which one to take the Thumbnail from?!

The CAD Setter Out Blog @CadSetterOut

Inventor Surfacing | AutoCAD | CAD Standards
 
Please use the Mark Solutions! Accept as Solution or Give Kudos! Kudos functions - Thank you!
Distinguished Contributor
Anthony
Posts: 387
Registered: ‎10-03-2011
Message 8 of 9 (618 Views)

Re: Exporting BOM Lists

03-26-2012 12:33 AM in reply to: PaulMunford

I am grouping exactly the same part so Inventor should retain the thumbnail image as it's the same part !

Anthony Goodwin ~ Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
Contributor
tech
Posts: 23
Registered: ‎05-22-2011
Message 9 of 9 (499 Views)

Re: Exporting BOM Lists

12-11-2012 10:01 PM in reply to: Anthony

Hi have a look at BOM Tools. I think it can do what you need.

 

http://www.mgfx.co.za/tools-for-inventor.htm

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube