Inventor General Discussion

Reply
*Expert Elite*
LT.Rusty
Posts: 724
Registered: ‎10-23-2012
Message 1 of 5 (417 Views)
Accepted Solution

Enable BOM View?

417 Views, 4 Replies
01-13-2014 03:28 PM

So there I was, adding a BOM to a drawing, and I clicked on the "BOM view must be enabled" prompt for about the 40,000th time in my Inventor career, and it finally occurred to me to wonder why.

 

Why do we have to enable the BOM view?  Is there a benefit to disabling it, or just not enabling it in the first place?  If I had the BOM view enabled but no parts list, would that cause a rift in reality through which would come the ravening sluagh or something?

 

I'm not criticizing, I'm just curious as to the intent behind this feature ...


___________________________________________________________

Product Design Suite Ultimate 2013, 2014, 2015

Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / Radeon R9-270X 4GB
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

*Expert Elite*
Curtis_Waguespack
Posts: 2,840
Registered: ‎03-08-2006
Message 2 of 5 (413 Views)

Re: Enable BOM View?

01-13-2014 03:35 PM in reply to: LT.Rusty

Hi LT.Rusty,

 

Unless I'm misunderstanding the issue, you could edit your *.iam template(s) and go to the BOM editor and enable both the Structured and Parts Only views, and then save your assembly template(s) with the BOM views enabled, and then you wouldn't need to enable the BOM views each time you place a Parts List on a drawing.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com

 

 



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
LT.Rusty
Posts: 724
Registered: ‎10-23-2012
Message 3 of 5 (398 Views)

Re: Enable BOM View?

01-13-2014 03:41 PM in reply to: Curtis_Waguespack

There is no real issue here, and I know I could permanently enable whatever in my templates ... I'm just curious as to why there needed to be an enabled / disabled state in the first place.

 

It just seems to be much like the device pictured here:

 


___________________________________________________________

Product Design Suite Ultimate 2013, 2014, 2015

Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / Radeon R9-270X 4GB
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

*Expert Elite*
Curtis_Waguespack
Posts: 2,840
Registered: ‎03-08-2006
Message 4 of 5 (393 Views)

Re: Enable BOM View?

01-13-2014 03:50 PM in reply to: LT.Rusty

LT.Rusty wrote:

 I'm just curious as to why there needed to be an enabled / disabled state in the first place.


 

 


Hi LT.Rusty,

Haveing both BOM views enabled does come with a "price" to performance, as Inventor is required to index both views when the drawing is brought up. This might not be an issue for many people, but for folks that work with large assemblies having the ability to enable only one of the BOM views can help considerably.

 

I hope this helps.
Best of luck to you in all of your Inventor pursuits,
Curtis
http://inventortrenches.blogspot.com



  solution.png  Did you find this reply helpful ? If so please use the Accept as Solution or  Kudos button below.





*Expert Elite*
LT.Rusty
Posts: 724
Registered: ‎10-23-2012
Message 5 of 5 (386 Views)

Re: Enable BOM View?

01-13-2014 04:00 PM in reply to: Curtis_Waguespack

Okay, that makes sense.  My idle curiosity has been - for the moment - satisfied.

 

Thanks!


___________________________________________________________

Product Design Suite Ultimate 2013, 2014, 2015

Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / Radeon R9-270X 4GB
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube