Inventor General Discussion

Reply
Active Member
t_sheen
Posts: 6
Registered: ‎10-18-2011
Message 1 of 8 (236 Views)

Drawing gauge points

236 Views, 7 Replies
09-27-2013 01:49 AM

I am trying to dimension a drawing and specify 2 diameters at specific gauge points; however I am unable to draw these on the drawing sheet. I have tried creating a sketch over the projected view; however this is not at all accurate.

 

Can anyone advise a way of creating them?

 

Please see attached a screen shot (drawn in AutoCAD) of what I am trying to achieve.

 

I am using Inventor 2008.

 

Gauge Point Sketch.JPG

Distinguished Mentor
ccarreiras
Posts: 703
Registered: ‎02-04-2010
Message 2 of 8 (219 Views)

Re: Drawing gauge points

09-27-2013 02:53 AM in reply to: t_sheen

"I have tried creating a sketch over the projected view; however this is not at all accurate."

 


Hi!

 

Before you hit the sketch button, first, select the view here you want to do the sketch.

 

If you don't select a view, the sketch will belong to the all sheet and its independent from the views

If you pic first the view, the sketch will belong at that view and associative to that view.

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you! 

Regards.
CarlosC

Autodesk Inventor 2014 Certified Professional
Autodesk Factory Design Suite Ultimate 2015
Windows 7 64Bit
Active Member
t_sheen
Posts: 6
Registered: ‎10-18-2011
Message 3 of 8 (212 Views)

Re: Drawing gauge points

09-27-2013 03:02 AM in reply to: ccarreiras

I am aware of clicking the view I want to create the sketch on, however, I cannot project any of the geometry from the view to be able to click on a specific point.

 

When I click line and try pick a point I cannot pick anything, only draw in fresh air.

 

Is there another option to use other than project geometry (which doesn’t work)?

Distinguished Mentor
ccarreiras
Posts: 703
Registered: ‎02-04-2010
Message 4 of 8 (203 Views)

Re: Drawing gauge points

09-27-2013 03:15 AM in reply to: t_sheen

Hi!

 

I'm doing that in Inventor 2014 and it's working well: I projected geometry from view, draw lines, points, etc and later i can use them to anchor the dimensions.

 

Are You using Inv 2014? Already install the Service Pack 1?

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you!

Regards.
CarlosC

Autodesk Inventor 2014 Certified Professional
Autodesk Factory Design Suite Ultimate 2015
Windows 7 64Bit
Active Member
t_sheen
Posts: 6
Registered: ‎10-18-2011
Message 5 of 8 (200 Views)

Re: Drawing gauge points

09-27-2013 03:16 AM in reply to: ccarreiras

I'm using 2008, perhaps this is not a feature in older versions?

Distinguished Mentor
ccarreiras
Posts: 703
Registered: ‎02-04-2010
Message 6 of 8 (186 Views)

Re: Drawing gauge points

09-27-2013 03:40 AM in reply to: t_sheen

Hi!

 

Maybe it's that, I can't tell, i've no access to this version.

My workaround:
In the solid, you can split the face to create the anchor point that you need to use in the drawing.

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you!

Regards.
CarlosC

Autodesk Inventor 2014 Certified Professional
Autodesk Factory Design Suite Ultimate 2015
Windows 7 64Bit
Active Member
t_sheen
Posts: 6
Registered: ‎10-18-2011
Message 7 of 8 (183 Views)

Re: Drawing gauge points

09-27-2013 03:42 AM in reply to: t_sheen

I have just discovered how to do it.

 

When selecting the lines to project you have to right click and click "done" this then allows the geometry to be used. 

Distinguished Mentor
ccarreiras
Posts: 703
Registered: ‎02-04-2010
Message 8 of 8 (169 Views)

Re: Drawing gauge points

09-27-2013 04:12 AM in reply to: t_sheen

Hi!

 

Really!? In newer versions we don't need that "done"!!! (I work with inventor from 2010 version)

 

Cool!!! You find the way. Good job. Bye.

 

Did you find this reply helpful ? If so, use the  Mark Solutions!  Accept as Solution or Give Kudos!Kudos - Thank you!

Regards.
CarlosC

Autodesk Inventor 2014 Certified Professional
Autodesk Factory Design Suite Ultimate 2015
Windows 7 64Bit

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube