Community
Inventor Forum
Welcome to Autodesk’s Inventor Forums. Share your knowledge, ask questions, and explore popular Inventor topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Create a sketch with line starting points depending on other sketches

1 REPLY 1
Reply
Message 1 of 2
inventor444
275 Views, 1 Reply

Create a sketch with line starting points depending on other sketches

Hello

 

I want to draw a line between the two sketches visible on the image below. The line should be in the plane visible. The starting point of the line should be from wherever the top sketch intersects  the plane of the current sketch. The finnish point of the line should be wherever a line of the bottom sketch intersects the current sketch plane.

 

There is no tooltip appearing that would allow me to quickly "attach" the starting line to the correct position. Is there such an aid, and how do i turn it on?2.jpg1.jpg

1 REPLY 1
Message 2 of 2
JDMather
in reply to: inventor444

Project Geometry.

 

and

your first two sketches aren't constrained.

http://home.pct.edu/~jmather/SkillsUSA%20University.pdf


-----------------------------------------------------------------------------------------
Autodesk Inventor 2019 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional


The CADWhisperer YouTube Channel


EESignature

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Autodesk Design & Make Report