Inventor General Discussion

Reply
Member
reedospeedo
Posts: 3
Registered: ‎06-07-2013
Message 1 of 5 (339 Views)

CAM help

339 Views, 4 Replies
11-19-2013 11:14 AM

I am currently working a Rotor that has 6 cams on it in inventor and i have no clue on how to tackle it. Can anyone help!?

 

Thanks,

ReedCam Dev3.jpgCam Dev4.jpg164773_157948614256917_6719385_n.jpg163039_157947174257061_1083765_n.jpgparts08.jpgrotor.jpgrotor_filling.jpg

*Expert Elite*
Cadmanto
Posts: 3,231
Registered: ‎12-07-2011
Message 2 of 5 (296 Views)

Re: CAM help

11-20-2013 06:48 PM in reply to: reedospeedo

One feature at a time.  I would start with creating a piece of round stock with the largest diameter with the overall length.

Then create revolved cuts and get it down to the basic shape.  Then once you get there, evaluate it from there and see if something clicks to create some of the more difficult features.  I am just suggesting that you at least take it as far as you can one step at a time.

Try not to look at the overall part.  Baby steps theory.

 

check.PNGIf this solved your issue please mark this posting "Accept as Solution".

Or if you like something that was said and it was helpful, Kudoskudos.PNG are appreciated. Thanks!!!! :smileyvery-happy:

 

New EE Logo.PNG

Inventor.PNG     vault.PNG

Best Regards,
Scott McFadden
Inventor Professional 2013
(Colossians 3:23-25)

Valued Contributor
CAG_DRAFT
Posts: 87
Registered: ‎07-30-2013
Message 3 of 5 (286 Views)

Re: CAM help

11-20-2013 08:00 PM in reply to: Cadmanto
Having never used it before, is the 'cam' DA going to be of any use for this style of cam?
Member
reedospeedo
Posts: 3
Registered: ‎06-07-2013
Message 4 of 5 (260 Views)

Re: CAM help

11-21-2013 09:51 AM in reply to: Cadmanto

I have every thing except the cams. I just dont know how to insert the data. do i model it (how do you do polar in inventor), use the cam feature in assembly?m134 rotor iventor.jpg

Valued Contributor
CAG_DRAFT
Posts: 87
Registered: ‎07-30-2013
Message 5 of 5 (242 Views)

Re: CAM help

11-21-2013 01:17 PM in reply to: reedospeedo
My first step would need to be getting the data into excel, and secondly see if it fits any 'standard' cam motion function profile.

And seeing as you are asking doing polar functions I'm guessing you are using 2012 or earlier?
(otherwise in the 2d sketch environment you can select the polar option when making an equation curve.)


Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.