Inventor General Discussion

Inventor General Discussion

Posts: 4
Registered: ‎11-07-2012
Message 1 of 3 (213 Views)
Accepted Solution

Bike: Weldments

213 Views, 2 Replies
11-07-2012 01:17 PM

I'm trying to make a bike, but I want to use some weldments on the frame. I've already placed 2 weldments, but I can't find out how to place the third weldment. I wanted to use a groove weldment, but it doesn't work. I have already done a groove weldment on the frame, so I don't understand why the otherone doesn't work. 


I just learnt a bit how to use weldments, but i can't find much information how to use it. I'll place my testframe in attachments. I hope someone can help me fix this or explain me what's the problem and how I should use weldments.



Valued Mentor
Posts: 303
Registered: ‎10-06-2011
Message 2 of 3 (201 Views)

Re: Bike: Weldments

11-07-2012 01:47 PM in reply to: niels_de_valck

Use Groove weld.

Follow steps shown in picture (see below).


1. Select face of tube

2. Select face of other tube,

3. Radial Fill.






GSE Consultants Inc.
Windsor, ON. Canada
Posts: 4
Registered: ‎11-07-2012
Message 3 of 3 (191 Views)

Re: Bike: Weldments

11-07-2012 02:18 PM in reply to: GSE_Dan_A

Thanks a lot!

Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.