Inventor General Discussion

Inventor General Discussion

Valued Contributor
Posts: 51
Registered: ‎11-23-2010
Message 1 of 3 (84 Views)

BOM starting out help

84 Views, 2 Replies
03-29-2012 04:29 AM

I'm just starting out with trying to implement BOM's in inventor. Basically at the moment cutting list are hand written to be passed on for manufacture. I mainly create drawings for welded ladder assemblies out of Aluminium. I have currently been placing multiple solid bodies in one .ipt file. I'm struggling to pull the info I'd like out of this file into my BOM in the .dwg file.


To start with I'm only looking for basic info such as:


material section

cut length

cut angle

Qty of each individual item.


Can anyone help achieve this or recommend some reading material?

Valued Contributor
Posts: 51
Registered: ‎11-23-2010
Message 2 of 3 (62 Views)

Re: BOM starting out help

03-30-2012 04:02 AM in reply to: nige106

I've attached a typical .ipt file if that helps.


I'd love for the BOM to show the length of the main chords, uprights and diags.


Below is a screen capture of the BOM as it is. Am I struggling as i have a multibodied .ipt file?




edit: added .iam file and screen shot.

*Expert Elite*
Posts: 3,206
Registered: ‎04-06-2010
Message 3 of 3 (58 Views)

Re: BOM starting out help

03-30-2012 04:39 AM in reply to: nige106

I don't think there is any way to get a real BOM form a single part.  You'll need to build this as an assembly to get individual components for the rails, rungs etc.



Please use Mark Solutions!.Accept as Solution &Give Kudos!Kudos to further enhance the value of these forums. Thank you! :smileyhappy:


Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.