Assembly section view

[Anonymous]

BlankIs it possible to put a sectioned assembly (i.e. using the 3/4 section
view tool from within the assembly) into a drawing? I have a small assembly
of 6 parts that I need to put into a drawing, showing the inner parts - the
view needs to be an isometric view.
When I place my section view in the drawing it shows as solid - not
sectioned.
I know about sectioning views in drawings, but not when the view is
isometric.
Please help.

Thanks.

Wayne

[Anonymous]

can you not make an iso view of a sectioned view in the drawing? i think i
have done it a number of times.

ncabilan


"Wayne" wrote in message
news:F63A5FFF7A0DE365503423C38E804C1E@in.WebX.maYIadrTaRb...
> BlankIs it possible to put a sectioned assembly (i.e. using the 3/4
section
> view tool from within the assembly) into a drawing? I have a small
assembly
> of 6 parts that I need to put into a drawing, showing the inner parts -
the
> view needs to be an isometric view.
> When I place my section view in the drawing it shows as solid - not
> sectioned.
> I know about sectioning views in drawings, but not when the view is
> isometric.
> Please help.
>
> Thanks.
>
> Wayne
>
>

[Anonymous]

Create a section veiw of the ortho in your .idw (drag it off the page if you
don't want it visible) and creat a projected ISO off of that.
----------------------------------------------------------------------------
------
"Wayne" wrote in message
news:F63A5FFF7A0DE365503423C38E804C1E@in.WebX.maYIadrTaRb...
> BlankIs it possible to put a sectioned assembly (i.e. using the 3/4
section
> view tool from within the assembly) into a drawing? I have a small
assembly
> of 6 parts that I need to put into a drawing, showing the inner parts -
the
> view needs to be an isometric view.
> When I place my section view in the drawing it shows as solid - not
> sectioned.
> I know about sectioning views in drawings, but not when the view is
> isometric.
> Please help.
>
> Thanks.
>
> Wayne
>
>

[Anonymous]

Thanks, even the simple things can seem complicated when its something you
don't do every day!
"ncabilan" wrote in message
news:77CD21FD3632B3B25F0103C7BF4E53CB@in.WebX.maYIadrTaRb...
> can you not make an iso view of a sectioned view in the drawing? i think i
> have done it a number of times.
>
> ncabilan
>
>
> "Wayne" wrote in message
> news:F63A5FFF7A0DE365503423C38E804C1E@in.WebX.maYIadrTaRb...
> > BlankIs it possible to put a sectioned assembly (i.e. using the 3/4
> section
> > view tool from within the assembly) into a drawing? I have a small
> assembly
> > of 6 parts that I need to put into a drawing, showing the inner parts -
> the
> > view needs to be an isometric view.
> > When I place my section view in the drawing it shows as solid - not
> > sectioned.
> > I know about sectioning views in drawings, but not when the view is
> > isometric.
> > Please help.
> >
> > Thanks.
> >
> > Wayne
> >
> >
>
>

[Anonymous]

There is a catch however. Your Iso section view will not show section
lines. I have yet to figure out why it will not show the section lines.
(Mechanical Desktop will )