Inventor General Discussion

Reply
*Myers, Kim
Message 1 of 9 (43 Views)

Assembly Segmentation

43 Views, 8 Replies
12-09-2002 10:45 PM
In an assembly file if you right click on a part, you have an option called
Segmentation. What is this? Believe it or not I could not find it in Help.
;-)
*Dotson, Sean
Message 2 of 9 (43 Views)

Re: Assembly Segmentation

12-09-2002 10:52 PM in reply to: *Myers, Kim
Playing around with the registry I see...Click it and see what happens. I'd
have a copy of the assembly saved elsewhere however...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"Kim Myers" <---> wrote in message
news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> In an assembly file if you right click on a part, you have an option
called
> Segmentation. What is this? Believe it or not I could not find it in
Help.
> ;-)
>
>
*Myers, Kim
Message 3 of 9 (43 Views)

Re:

12-09-2002 11:35 PM in reply to: *Myers, Kim
This wasn't in the Registry. I was in Inventor in an .iam file. Right click
on one of the inserted components and it's the second from the bottom.


"Sean Dotson" wrote in message
news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> Playing around with the registry I see...Click it and see what happens.
I'd
> have a copy of the assembly saved elsewhere however...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "Kim Myers" <---> wrote in message
> news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > In an assembly file if you right click on a part, you have an option
> called
> > Segmentation. What is this? Believe it or not I could not find it in
> Help.
> > ;-)
> >
> >
>
>
*Dotson, Sean
Message 4 of 9 (43 Views)

Re:

12-09-2002 11:41 PM in reply to: *Myers, Kim
I believe that this only gets turned on if you have activated the debug
toolbars (which are turned on in the registry). Many of these tools are not
ready for prime time and can cause problems. Use at your own risk...

--
Sean Dotson, PE
http://www.sdotson.com
Check the Inventor FAQ for most common questions
http://www.sdotson.com/faq.html
-----------------------------------------
"Kim Myers" <---> wrote in message
news:AC17599C17B46477DB04708582E507AE@in.WebX.maYIadrTaRb...
> This wasn't in the Registry. I was in Inventor in an .iam file. Right
click
> on one of the inserted components and it's the second from the bottom.
>
>
> "Sean Dotson" wrote in message
> news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> > Playing around with the registry I see...Click it and see what happens.
> I'd
> > have a copy of the assembly saved elsewhere however...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "Kim Myers" <---> wrote in message
> > news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > > In an assembly file if you right click on a part, you have an option
> > called
> > > Segmentation. What is this? Believe it or not I could not find it in
> > Help.
> > > ;-)
> > >
> > >
> >
> >
>
>
*Myers, Kim
Message 5 of 9 (43 Views)

Re:

12-09-2002 11:44 PM in reply to: *Myers, Kim
Sorry I had a blond moment. I was hoping I could post something about that
before you did!! I forgot I turned on the Test Toolbars. I now know why
you accused me of playing around with the registry. You caught me.

Is it time to go home yet?


"Sean Dotson" wrote in message
news:A0B425B16ABFE997BB2E13BF8AB8E759@in.WebX.maYIadrTaRb...
> I believe that this only gets turned on if you have activated the debug
> toolbars (which are turned on in the registry). Many of these tools are
not
> ready for prime time and can cause problems. Use at your own risk...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "Kim Myers" <---> wrote in message
> news:AC17599C17B46477DB04708582E507AE@in.WebX.maYIadrTaRb...
> > This wasn't in the Registry. I was in Inventor in an .iam file. Right
> click
> > on one of the inserted components and it's the second from the bottom.
> >
> >
> > "Sean Dotson" wrote in message
> > news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> > > Playing around with the registry I see...Click it and see what
happens.
> > I'd
> > > have a copy of the assembly saved elsewhere however...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "Kim Myers" <---> wrote in message
> > > news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > > > In an assembly file if you right click on a part, you have an option
> > > called
> > > > Segmentation. What is this? Believe it or not I could not find it
in
> > > Help.
> > > > ;-)
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Autodesk\
Message 6 of 9 (43 Views)

Re:

12-10-2002 12:27 AM in reply to: *Myers, Kim
A more accurate statement is that these tools are not meant for end users.
Their only purpose is to help developers and QA engineers debug models. If
you use these and screw up your model, you're out of luck.

Loren Jahraus
Autodesk Inventor Workflow Team


"Sean Dotson" wrote in message
news:A0B425B16ABFE997BB2E13BF8AB8E759@in.WebX.maYIadrTaRb...
> I believe that this only gets turned on if you have activated the debug
> toolbars (which are turned on in the registry). Many of these tools are
not
> ready for prime time and can cause problems. Use at your own risk...
>
> --
> Sean Dotson, PE
> http://www.sdotson.com
> Check the Inventor FAQ for most common questions
> http://www.sdotson.com/faq.html
> -----------------------------------------
> "Kim Myers" <---> wrote in message
> news:AC17599C17B46477DB04708582E507AE@in.WebX.maYIadrTaRb...
> > This wasn't in the Registry. I was in Inventor in an .iam file. Right
> click
> > on one of the inserted components and it's the second from the bottom.
> >
> >
> > "Sean Dotson" wrote in message
> > news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> > > Playing around with the registry I see...Click it and see what
happens.
> > I'd
> > > have a copy of the assembly saved elsewhere however...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "Kim Myers" <---> wrote in message
> > > news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > > > In an assembly file if you right click on a part, you have an option
> > > called
> > > > Segmentation. What is this? Believe it or not I could not find it
in
> > > Help.
> > > > ;-)
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Myers, Kim
Message 7 of 9 (43 Views)

Re:

12-10-2002 01:26 AM in reply to: *Myers, Kim
Boy did I open a can of worms.

I'm sorry
I'm sorry
I'm sorry ...


"Loren Jahraus (Autodesk)" wrote in message
news:FAF8AC2CC9399B05747A05DDCC8C029B@in.WebX.maYIadrTaRb...
> A more accurate statement is that these tools are not meant for end users.
> Their only purpose is to help developers and QA engineers debug models. If
> you use these and screw up your model, you're out of luck.
>
> Loren Jahraus
> Autodesk Inventor Workflow Team
>
>
> "Sean Dotson" wrote in message
> news:A0B425B16ABFE997BB2E13BF8AB8E759@in.WebX.maYIadrTaRb...
> > I believe that this only gets turned on if you have activated the debug
> > toolbars (which are turned on in the registry). Many of these tools are
> not
> > ready for prime time and can cause problems. Use at your own risk...
> >
> > --
> > Sean Dotson, PE
> > http://www.sdotson.com
> > Check the Inventor FAQ for most common questions
> > http://www.sdotson.com/faq.html
> > -----------------------------------------
> > "Kim Myers" <---> wrote in message
> > news:AC17599C17B46477DB04708582E507AE@in.WebX.maYIadrTaRb...
> > > This wasn't in the Registry. I was in Inventor in an .iam file. Right
> > click
> > > on one of the inserted components and it's the second from the bottom.
> > >
> > >
> > > "Sean Dotson" wrote in message
> > > news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> > > > Playing around with the registry I see...Click it and see what
> happens.
> > > I'd
> > > > have a copy of the assembly saved elsewhere however...
> > > >
> > > > --
> > > > Sean Dotson, PE
> > > > http://www.sdotson.com
> > > > Check the Inventor FAQ for most common questions
> > > > http://www.sdotson.com/faq.html
> > > > -----------------------------------------
> > > > "Kim Myers" <---> wrote in message
> > > > news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > > > > In an assembly file if you right click on a part, you have an
option
> > > > called
> > > > > Segmentation. What is this? Believe it or not I could not find
it
> in
> > > > Help.
> > > > > ;-)
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
*Allen, Albert
Message 8 of 9 (43 Views)

Re:

12-10-2002 02:00 AM in reply to: *Myers, Kim
El uso incorecto intensional :~)
"Kim Myers" <---> wrote in message
news:780F597E65ACA5CE7DFC1F3BB9795D15@in.WebX.maYIadrTaRb...
> Boy did I open a can of worms.
>
> I'm sorry
> I'm sorry
> I'm sorry ...
>
>
> "Loren Jahraus (Autodesk)" wrote in message
> news:FAF8AC2CC9399B05747A05DDCC8C029B@in.WebX.maYIadrTaRb...
> > A more accurate statement is that these tools are not meant for end
users.
> > Their only purpose is to help developers and QA engineers debug models.
If
> > you use these and screw up your model, you're out of luck.
> >
> > Loren Jahraus
> > Autodesk Inventor Workflow Team
> >
> >
> > "Sean Dotson" wrote in message
> > news:A0B425B16ABFE997BB2E13BF8AB8E759@in.WebX.maYIadrTaRb...
> > > I believe that this only gets turned on if you have activated the
debug
> > > toolbars (which are turned on in the registry). Many of these tools
are
> > not
> > > ready for prime time and can cause problems. Use at your own risk...
> > >
> > > --
> > > Sean Dotson, PE
> > > http://www.sdotson.com
> > > Check the Inventor FAQ for most common questions
> > > http://www.sdotson.com/faq.html
> > > -----------------------------------------
> > > "Kim Myers" <---> wrote in message
> > > news:AC17599C17B46477DB04708582E507AE@in.WebX.maYIadrTaRb...
> > > > This wasn't in the Registry. I was in Inventor in an .iam file.
Right
> > > click
> > > > on one of the inserted components and it's the second from the
bottom.
> > > >
> > > >
> > > > "Sean Dotson" wrote in message
> > > > news:A6F2CBF09986E9C4360FDC5EC85256DD@in.WebX.maYIadrTaRb...
> > > > > Playing around with the registry I see...Click it and see what
> > happens.
> > > > I'd
> > > > > have a copy of the assembly saved elsewhere however...
> > > > >
> > > > > --
> > > > > Sean Dotson, PE
> > > > > http://www.sdotson.com
> > > > > Check the Inventor FAQ for most common questions
> > > > > http://www.sdotson.com/faq.html
> > > > > -----------------------------------------
> > > > > "Kim Myers" <---> wrote in message
> > > > > news:7A7733A20E83D1D01C2BD460B1FD89FC@in.WebX.maYIadrTaRb...
> > > > > > In an assembly file if you right click on a part, you have an
> option
> > > > > called
> > > > > > Segmentation. What is this? Believe it or not I could not find
> it
> > in
> > > > > Help.
> > > > > > ;-)
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
Distinguished Contributor
rllthomas
Posts: 2,068
Registered: ‎12-10-2003
Message 9 of 9 (43 Views)

Re:

12-10-2002 02:47 AM in reply to: *Myers, Kim
I'm more amazed that very many people know HOW to get those tools up in R6. Necessity is the mother of invention ...
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.