Inventor General Discussion

Reply
Distinguished Contributor
Raider_007
Posts: 480
Registered: ‎08-22-2006
Message 1 of 10 (1,090 Views)

3D Monitor/TV/Projector

1090 Views, 9 Replies
10-26-2012 07:38 AM

Hi guys is there a way of viewing your Inventor models in full 3D on a 3D TV/Monitor/Projector? Obviously with a quadro VGA Card and glasses... Is it posible and how can this be set up?

 

Thanks

Pieter

Mentor
Doug_DuPont
Posts: 209
Registered: ‎09-23-2008
Message 2 of 10 (1,082 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 08:14 AM in reply to: Raider_007

You might to check this out.

You have to take your model into Showcase.

 

http://labs.autodesk.com/utilities/showcase_ar

Douglas DuPont
Inventor 2013
GeForce GTX 580
Windows 7 64 Bit
Distinguished Contributor
Ryan.Martinez
Posts: 141
Registered: ‎07-29-2011
Message 3 of 10 (1,077 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 08:23 AM in reply to: Doug_DuPont

I saw something like this at AU last year. It was a walk through of a bus and you used an xbox control to move your P.O.V. around. I don't remember the name of the software though.

PDS 2014
PDS 2015
Distinguished Contributor
Raider_007
Posts: 480
Registered: ‎08-22-2006
Message 4 of 10 (1,073 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 08:29 AM in reply to: Raider_007

The thing is that we have a 3D projector with glasses and when we start Inventor it sees it as a 2D image. Is there a setting or something you can set to enable the 3D vision? I am new to this so dont know where to start.

The whole setup works well with 3D movies etc but how to convert the Inventor 3D model to be the correct source...

*Expert Elite*
DarrenP
Posts: 7,201
Registered: ‎09-13-2007
Message 5 of 10 (1,065 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 08:38 AM in reply to: Raider_007

i think you would have to use other software like showcase, 3ds max or maya

or a 3rd party add on for inventor if there is one

Distinguished Contributor
Raider_007
Posts: 480
Registered: ‎08-22-2006
Message 6 of 10 (1,056 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 09:15 AM in reply to: Raider_007
Hi thanks for all the replies so far but it sounds like this is not done easilly. I find it hard to believe that you cannot use a 3D TV or Projector with a 3D application like Inventor.
Distinguished Contributor
Ryan.Martinez
Posts: 141
Registered: ‎07-29-2011
Message 7 of 10 (1,050 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 09:23 AM in reply to: Raider_007

There are more important things that need to be fixed with inventor before AD adds features like this.

PDS 2014
PDS 2015
*Expert Elite*
DarrenP
Posts: 7,201
Registered: ‎09-13-2007
Message 8 of 10 (1,046 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 09:33 AM in reply to: Ryan.Martinez

if you have product design standard or higher you have access to showcase

*Expert Elite*
mrattray
Posts: 2,471
Registered: ‎09-13-2011
Message 9 of 10 (1,040 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 09:42 AM in reply to: Raider_007

Just because it's a 3D model doesn't mean it can be displayed in 3D. As similar as the two things may sound, they are actually quite different.

Mike (not Matt) Rattray

Distinguished Contributor
Raider_007
Posts: 480
Registered: ‎08-22-2006
Message 10 of 10 (1,020 Views)

Re: 3D Monitor/TV/Projector

10-26-2012 11:55 AM in reply to: Raider_007
I see it looks like Navisworks and Showcase has a stereoscopic output function. Anyway its a pitty Inventor doesnt support it.
I will keep on digging and see what I find.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube