10 Foot container?

[SemiCatS]

Hi.

I'm currently working on a project where we're going to build in a winch into a 10 foot container. Only trouble is... I cannot seem to find a "real" 10 foot container in Inventor native format nor step-format. Maybe one of you guys out there is sitting on such a container and would like to share? Since I'm going to use the existing frame,
it's not enough to just have the "shell". I need all the framework and such too.

Thanks in advance for any help provided here 🙂

Best regards

Stig Morten Thu

[Anonymous]

http://www.cbliss.com/inventor/Parts.htm

scroll to bottom


--
Duncan
"Humour ... is one man shouting gibberish in the face of authority, and
proving by fabricated insanity that nothing could be as mad as what passes
for ordinary living."
(Terence 'Spike' Milligan K.B.E., 1918-2002)
www.autodesk.co.uk/inventorjobs
http://support.microsoft.com/default.aspx/kb/555375



wrote in message news:6124273@discussion.autodesk.com...
Hi. I'm currently working on a project where we're going to build in a winch
into a 10 foot container. Only trouble is... I cannot seem to find a "real"
10 foot container in Inventor native format nor step-format. Maybe one of
you guys out there is sitting on such a container and would like to share?
Since I'm going to use the existing frame, it's not enough to just have the
"shell". I need all the framework and such too. Thanks in advance for any
help provided here 🙂 Best regards Stig Morten Thu

[SemiCatS]

Hi.



Thanks for the link. Since the containers here are 20 and 40 feet, I will have to modify a bit. I will give it a try and see what I can come up with. Thanks again 🙂



Stig Morten Thu

[Anonymous]

I have a 9 ft container 😉

[Anonymous]

Nice, if you need a pipe cap, I can help you out as
well

--
IV2009-Pro Sp1
Dell 670 dual Xeon - 3.2
3gb memory,
SCSI320-15k rpm
XP-Pro, sp3
Quadro FX3400: Driver: 181.20
Direct3D
SpacePilot Rel V: 3.6.10 Dvr V: 6.6.4 Firmware 3.12
AVG 8.0

style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">

<Josh_Petitt> wrote in message
href="news:6124569@discussion.autodesk.com">news:6124569@discussion.autodesk.com...

I
have a 9 ft container 😉

[SemiCatS]

I downloaded the containers and modified a 20' container (just shortened a few of the parts) and it worked quite well 🙂 Thanks for the link.

Best regards

Stig Morten Thu