Inventor Fusion

Inventor Fusion

Reply
Mentor
hypersonic
Posts: 227
Registered: ‎12-27-2007
Message 1 of 8 (342 Views)
Accepted Solution

fusion boot time? whats your experience?

342 Views, 7 Replies
12-19-2011 08:08 AM

I am running an i7-2600 3.4GHz processor with windows 7 ultimate and a seagate 15k drive 8GB ram and it takes about

20 seconds to fire up Fusion.  UGH. 

What are you all seeing for boot times for Fusion?

 

Thanks!

Board Manager
scott.sheppard
Posts: 1,104
Registered: ‎11-13-2006
Message 2 of 8 (333 Views)

Re: fusion boot time? What's your experience?

12-20-2011 11:53 AM in reply to: hypersonic

Inventor Fusion uses a technology where an install is not required. That's the UP side. The DOWN side is that it takes a little longer to boot up.



Scott Sheppard
Program Manager
Autodesk Labs
Autodesk, Inc.
Board Manager
schneik
Posts: 669
Registered: ‎04-05-2003
Message 3 of 8 (320 Views)

Re: fusion boot time? whats your experience?

12-21-2011 12:38 PM in reply to: hypersonic

After a restart of my computer Inventor Fusion will take 30 to 40 seconds to launch. This is expected.

There after Fusion takes about 7 seconds to launch on subsequent runs.

 

Kevin Schneider

Kevin Schneider


15" Macbook Pro Retina - OSX 10.9 in Portland, Oregon


Member
KeighanD
Posts: 5
Registered: ‎05-13-2011
Message 4 of 8 (206 Views)

Re: fusion boot time? whats your experience?

04-02-2012 12:53 PM in reply to: hypersonic

Fusion 2013

cold ... 13 seconds to splash screen and 46 seconds until ready to load project

2nd run ... 3 seconds to splash screen and 13 seconds to ready to load project

 

Alienware M17X10 laptop with an Intel i7 CPU and 8G Ram and Win7 OS.

Valued Contributor
nannerdw
Posts: 95
Registered: ‎06-09-2008
Message 5 of 8 (156 Views)

Re: fusion boot time? whats your experience?

04-18-2012 05:05 AM in reply to: KeighanD

^Is that with a hybrid hard drive like the Momentus XT?

-Using Autodesk Inventor Professional 2012
Member
KeighanD
Posts: 5
Registered: ‎05-13-2011
Message 6 of 8 (144 Views)

Re: fusion boot time? whats your experience?

04-18-2012 08:54 AM in reply to: nannerdw

no clue what a "a hybrid hard drive like the Momentus XT" is ... twin 500GB SATA 7200rpm 2.5in Laptop Drives [RAID 0 configured] are what's in the box.

Valued Contributor
nannerdw
Posts: 95
Registered: ‎06-09-2008
Message 7 of 8 (137 Views)

Re: fusion boot time? whats your experience?

04-18-2012 11:33 AM in reply to: KeighanD

It's a spinning platter hard drive with a small solid state drive built inside.  It automatically transfers frequently used files to the SSD for faster load times.  I've gotten a pretty good performance boost out of it, especially for starting up my computer and opening Inventor.

-Using Autodesk Inventor Professional 2012
Member
KeighanD
Posts: 5
Registered: ‎05-13-2011
Message 8 of 8 (133 Views)

Re: fusion boot time? whats your experience?

04-18-2012 02:10 PM in reply to: nannerdw

ahhh, OK, thanks for that.  When I picked the components for this machine, the idea was to upgrade to solid-state hardrives in year 3 although that may get pushed to year 2 if funding comes up.

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.