Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I am fairly new to inventor fusion and have been teaching myself as I go. I am drawing a 3d model of an axle for a cart and cannot figure out how to draw a cylindrical 3d support strut going from the horizontal to vertical axis with a circular cross section. Any help would be appreciated. Andy
Please find attached the image of my work so far. The diagonal axle would effectively run along the works axis label in the image (hopefully visible in the image). There would be a flattened tube section at either end that i can draw as a simple rectangle
Can you create a 3-point rectangle (do it line-by-line if you have to) at that angle and then Revolve the rectangle (would be easier than setting up an angled sketch plane)?
----------------------------------------------------------------------------------------- Autodesk Inventor 2019 Certified Professional Autodesk AutoCAD 2013 Certified Professional Certified SolidWorks Professional
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")