Inventor Fusion

Reply
Member
Posts: 3
Registered: ‎06-11-2012
Message 1 of 4 (1,148 Views)

Rotate? Orbit? during an assembly in fusion

1148 Views, 3 Replies
06-28-2012 06:50 AM

I just started using fusion 2013 and have a small 3 part assembly right now. I have 2 of the pieces mated already and they move freely being that there is a pin holding them together. Though my 3rd part is facing the wrong direction and I cannot seem to figure out how to turn it around. I know this cant be as hard as it seems to be. Im used to solid works where you can select individual parts and move them around during the assembly process, on this program when you go to move an object in a forward or back direction its fine but to change the direction the body is facing I cant figure out. When you go to orbit it selects all the parts in the drawing which doesnt help me. help please??

*Expert Elite*
Posts: 25,288
Registered: ‎04-20-2006
Message 2 of 4 (1,143 Views)

Re: Rotate? Orbit? during an assembly in fusion

06-28-2012 03:30 PM in reply to: MTU2013

MTU2013 wrote:

 I know this cant be as hard as it seems to be. Im used to solid works


Don't confuse Free Inventor Fusion with Autodesk Inventor.  Autodesk Inventor is the equivalent of SolidWorks.

Please mark this response as "Accept as Solution" if it answers your question.
-----------------------------------------------------------------------------------------
Autodesk Inventor 2014 Certified Professional
Autodesk AutoCAD 2013 Certified Professional
Certified SolidWorks Professional
Inventor Professional 2014 Edu 64-bit
http://www.autodesk.com/edcommunity
http://home.pct.edu/~jmather/content/DSG322/inventor_surface_tutorials.htm
Board Manager
schneik
Posts: 587
Registered: ‎04-05-2003
Message 3 of 4 (1,137 Views)

Re: Rotate? Orbit? during an assembly in fusion

06-28-2012 09:53 PM in reply to: MTU2013

Try this. Select the move command and double click the part you want to move. Double clicking will select the entire part. You should be able to use the triad to change the orientation of the part as you need.

 

Hope this helps.

Kevin Schneider


15" Macbook Pro Retina - OSX 10.9 in Portland, Oregon


Board Manager
schneik
Posts: 587
Registered: ‎04-05-2003
Message 4 of 4 (1,126 Views)

Re: Rotate? Orbit? during an assembly in fusion

06-28-2012 10:05 PM in reply to: JDMather

JD;

 

You are a huge asset to the community and I appreciate your efforts. For Fusion questions please try and help and not just tell folks they are using the wrong product. Thanks for all your help and understanding.

Kevin Schneider


15" Macbook Pro Retina - OSX 10.9 in Portland, Oregon


You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Welcome to the new Autodesk Community!
If this is your first visit, click here to get started and make the most of the Community. Let us know what you think of the new experience in the Community Feedback Forum.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube