Inventor Fusion

Reply
Member
Fusionewb
Posts: 5
Registered: ‎08-18-2012
Message 1 of 5 (502 Views)

Best Way to Add Material?

502 Views, 4 Replies
08-25-2012 06:58 AM

Screen Shot 2012-08-25 at 9.45.31 AM.pngWhat I am trying to do is add material to the long vertical side of this plate using the selected hole as a reference point. I want to add a radius of 7.0 mm from the center of the hole and then blend it smoothly to the plane. 

 

Thanks!

 

 

 

 

Board Manager
Phil.E
Posts: 273
Registered: ‎06-29-2012
Message 2 of 5 (491 Views)

Re: Best Way to Add Material?

08-27-2012 01:32 PM in reply to: Fusionewb

It's hard to tell from your picture and description what you intend with this model. Can you post another picture that better describes your intent/your problem?

 

In general: you can add more material with an extruded sketch profile. In the Extrude dialog set "Operation" to "Join".

 



Phil Eichmiller
Software QA Engineer
Fusion Quality Assurance Team
Autodesk, Inc.

Member
Fusionewb
Posts: 5
Registered: ‎08-18-2012
Message 3 of 5 (465 Views)

Re: Best Way to Add Material?

09-04-2012 04:36 PM in reply to: Fusionewb

Please see the attached .pdf to see better what I am trying to do. The .pdf shows "bumps" around four of the 1/8" holes in the plate. I want to add these contours flat-sided model. These contours are simply 7.0 mm radii as measured from the center of the 1/8" holes. 

 

I should have drawn these in the first sketch before I extruded the flat plate into a 6 mm solid but I didn't know how to draw it then, either.

Board Manager
Phil.E
Posts: 273
Registered: ‎06-29-2012
Message 4 of 5 (460 Views)

Re: Best Way to Add Material?

09-04-2012 05:07 PM in reply to: Fusionewb

To add material to an existing solid:

If you sketch a new shape and wish to add material using that sketched shape, just pick the option in the Extrude dialog to "Join" and the new shape will join with the existing solid body.

 

To create the shape in your diagram:

The key step is to draw the arc in the sketch with the rest of the profile using either Arc commands or Circle commands. Trim the lines if needed. You can also Fillet the lines to blend them. 



Phil Eichmiller
Software QA Engineer
Fusion Quality Assurance Team
Autodesk, Inc.

Member
Fusionewb
Posts: 5
Registered: ‎08-18-2012
Message 5 of 5 (453 Views)

Re: Best Way to Add Material?

09-05-2012 02:06 PM in reply to: Fusionewb

Thanks for the help! That worked out great. 

 

....For other beginners who may be following along:

 

"Circle Center Radius"; placed the center point of the circle on the center of the hole

"Extrude", selected dragged down the "Join" option, and then extruded just the portion of the circle that protruded from the edge of the plate to the depth of the plate (6.0 mm).

 

 

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Inventor Exchange Apps

Created by the community for the community, Autodesk Exchange Apps for Autodesk Inventor helps you achieve greater speed, accuracy, and automation from concept to manufacturing.

Connect with Inventor

Twitter

Facebook

Blogs

Pinterest

Youtube