Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Show only
|
Search instead for
Did you mean:
This page has been translated for your convenience with an automatic translation service. This is not an official translation and may contain errors and inaccurate translations. Autodesk does not warrant, either expressly or implied, the accuracy, reliability or completeness of the information translated by the machine translation service and will not be liable for damages or losses caused by the trust placed in the translation service.Translate
I started a BOMTables and selected piping accordingly, When it displayed the table in placed each component in it own row with a quantity of 1, such that I had 4 rows of 14" LR Elbows each with a quantity of 1 rather than 1 row with a quantity of 4.
How do we reduce the size of the table as you can imagine in is very large?
By the sounds of it, you have 4 different elbows. This means that there are 4 different member files for these parts.
If all 4 parts are "physically" the same and you want them to use the same member file, then you will need to check to properties and parameters to make sure that they are not different.
-Chris Rogers Inventor Certified Professional ________________________________________________________ If this post helps, please click the "Thumbs up"/"Kudos" If this post gives the solution, please click "Accept as Solution"
![Autodesk Design & Make Report](https://forums.autodesk.com/t5/image/serverpage/image-id/1350519iCB55845EBFC43016/image-size/large?v=v2&px=999" "Autodesk Design & Make Report")