Installation & Licensing

Reply
New Member
Newell
Posts: 2
Registered: ‎12-21-2002
Message 1 of 4 (139 Views)

Slow DWG load when attached to network

139 Views, 3 Replies
08-09-2000 09:09 PM
Hi All,

Have a strange performance issue with ACAD 14. I have an NT Server 4.0 that we keep all our drawings on. The drawing I am loading is 5MB in size. It loads extremely slowing from the server. If I copy the file to the workstation, and try to load it, it also loads extremely slowly. If I unmap the network drive, it loads quickly. Any idea what ACAD is doing when it sees the network drive? Its not traffic, I disconnected everything and made a station to server 100mb direct link with no change, and the file copies from the server to the station in no time. Any ideas?

Jay Newell
*Charlie
Message 2 of 4 (139 Views)

Re: Slow DWG load when attached to network

08-10-2000 02:36 AM in reply to: Newell
We experienced a similar slow down in performance of our workstations when
we switched to an NT server from Novell. Tried the same things you describe,
and got the same results. Our network manager made a few inquiries and the
long and the short of it is NT isn't as good (as far as fast access to files
for acad/mech desktop is concerned) as Novell. We still haven't got back to
the speed we saw with Novell yet :-(

newell wrote in message
news:ef33ccc.-1@WebX.SaUCah8kaAW...
> Hi All,
>
> Have a strange performance issue with ACAD 14. I have an NT Server 4.0
that we keep all our drawings on. The drawing I am loading is 5MB in size.
It loads extremely slowing from the server. If I copy the file to the
workstation, and try to load it, it also loads extremely slowly. If I unmap
the network drive, it loads quickly. Any idea what ACAD is doing when it
sees the network drive? Its not traffic, I disconnected everything and made
a station to server 100mb direct link with no change, and the file copies
from the server to the station in no time. Any ideas?
>
> Jay Newell
*Hornung, Steffen
Message 3 of 4 (139 Views)

Re:

08-14-2000 04:37 AM in reply to: Newell
Hi, I experienced similar things. For a long time speed was no problem while
only one ACAD R14 was connected to the NT Server. After having the second
machine running for three weeks, the first machine began to slow down from
one moment to the other. Tried some cleanings (registry, unneeded files,
etc.). But no success. Speed on our second machine is as fast as it ever
was.
"Charlie" schrieb im Newsbeitrag
news:ELCM196214EDD1@elcometer.com...
We experienced a similar slow down in performance of our workstations when
we switched to an NT server from Novell. Tried the same things you describe,
and got the same results. Our network manager made a few inquiries and the
long and the short of it is NT isn't as good (as far as fast access to files
for acad/mech desktop is concerned) as Novell. We still haven't got back to
the speed we saw with Novell yet :-( newell wrote in
message news:ef33ccc.-1@WebX.SaUCah8kaAW... > Hi All, > > Have a strange
performance issue with ACAD 14. I have an NT Server 4.0 that we keep all our
drawings on. The drawing I am loading is 5MB in size. It loads extremely
slowing from the server. If I copy the file to the workstation, and try to
load it, it also loads extremely slowly. If I unmap the network drive, it
loads quickly. Any idea what ACAD is doing when it sees the network drive?
Its not traffic, I disconnected everything and made a station to server
100mb direct link with no change, and the file copies from the server to the
station in no time. Any ideas? > > Jay Newell
*Orr, Tommy
Message 4 of 4 (139 Views)

Re:

10-25-2000 11:29 AM in reply to: Newell
This is just a suggestion
Try your updating network card driver, personally I have had trouble with
some older 10/100 3com cards(3c515) it was great in win 95/98 but in NT
10-15 minutes working with a 5mb file. Check on your card vendor site for
any info. Check Page file size , if you have 2 drives move it off c: to d:
then reboot and move it back to c: to help get rid of any fragmentation.
SCSI drives are better to use on a server if you can afford them , IDE
tends to use more CPU time but if you use IDE try to get the fastest ones
you can find.

Hope this helps
Tommy

"Steffen Hornung" wrote in message
news:FFEE935C5E0E0C9B07EF23FF1D7A2CF5@in.WebX.SaUCah8kaAW...
> Hi, I experienced similar things. For a long time speed was no problem
while
> only one ACAD R14 was connected to the NT Server. After having the second
> machine running for three weeks, the first machine began to slow down from
> one moment to the other. Tried some cleanings (registry, unneeded files,
> etc.). But no success. Speed on our second machine is as fast as it ever
> was.
> "Charlie" schrieb im Newsbeitrag
> news:ELCM196214EDD1@elcometer.com...
> We experienced a similar slow down in performance of our workstations when
> we switched to an NT server from Novell. Tried the same things you
describe,
> and got the same results. Our network manager made a few inquiries and the
> long and the short of it is NT isn't as good (as far as fast access to
files
> for acad/mech desktop is concerned) as Novell. We still haven't got back
to
> the speed we saw with Novell yet :-( newell wrote in
> message news:ef33ccc.-1@WebX.SaUCah8kaAW... > Hi All, > > Have a strange
> performance issue with ACAD 14. I have an NT Server 4.0 that we keep all
our
> drawings on. The drawing I am loading is 5MB in size. It loads extremely
> slowing from the server. If I copy the file to the workstation, and try to
> load it, it also loads extremely slowly. If I unmap the network drive, it
> loads quickly. Any idea what ACAD is doing when it sees the network drive?
> Its not traffic, I disconnected everything and made a station to server
> 100mb direct link with no change, and the file copies from the server to
the
> station in no time. Any ideas? > > Jay Newell
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube