Installation & Licensing

Installation & Licensing

Reply
*Mutsaars, Rob
Message 1 of 3 (212 Views)

Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect server

212 Views, 2 Replies
11-02-1999 12:36 AM
Hello,

A customer of ours is using the following configuration :

Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.

We configured Autocad to print to a Novell queue, which is connected at the
printserver.

The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.

Does somebody know the correct settings how to set this up.

Thanks in advance,

Rob Mutsaars
Posware Support - Holland
*Mutsaars, Rob
Message 2 of 3 (212 Views)

Re: Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect

11-02-1999 08:14 AM in reply to: *Mutsaars, Rob
Hello,

A customer of ours is using the following configuration :

Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.

We configured Autocad to print to a Novell queue, which is connected at the
printserver.

The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.

Does somebody know the correct settings how to set this up.

Thanks in advance,

Rob Mutsaars
Posware Support - Holland
*Mutsaars, Rob
Message 3 of 3 (212 Views)

Re: Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect

11-02-1999 08:15 AM in reply to: *Mutsaars, Rob
Hello,

A customer of ours is using the following configuration :

Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.

We configured Autocad to print to a Novell queue, which is connected at the
printserver.

The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.

Does somebody know the correct settings how to set this up.

Thanks in advance,

Rob Mutsaars
Posware Support - Holland
Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.
Need installation help?

Start with some of our most frequented solutions or visit the Installation and Licensing Forum to get help installing your software.