Installation & Licensing
Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
*Mutsaars, Rob
Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect server
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
170 Views, 2 Replies
11-02-1999 12:36 AM
Hello,
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
*Mutsaars, Rob
Re: Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-02-1999 08:14 AM in reply to:
*Mutsaars, Rob
Hello,
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
*Mutsaars, Rob
Re: Problems with print AutoCAD 13 files to a Encad plotter with a JetDirect
Options
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
11-02-1999 08:15 AM in reply to:
*Mutsaars, Rob
Hello,
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
A customer of ours is using the following configuration :
Novell 5 file-server
AutoCAD 13 on a local Win-95 workstation
A Encad\Cadjet plotter with parallel interface, connected throught a HP
Jetdirect 170 print server.
We configured Autocad to print to a Novell queue, which is connected at the
printserver.
The problem is that, when the customer wants to print a drawing, the plotter
starts printing, but after a while it stops. The print-job is no longer in
the queueu.
Does somebody know the correct settings how to set this up.
Thanks in advance,
Rob Mutsaars
Posware Support - Holland
