Installation & Licensing

Reply
New Member
ALANPURE
Posts: 1
Registered: ‎04-15-2013
Message 1 of 1 (241 Views)

Problem upgrading AutoCAD LT 2008 to AutoCAD LT 2013

241 Views, 0 Replies
04-15-2013 05:54 AM

Hi - We purchased 3x 2008 versions of Autocad lt in 2008 while working as a Chartered Architectural Practice on the Great Yarmouth College campus. I believe that 2 of the licences were purchased through the College for us to take when we moved out of their Alchemy facility. The contacts name at the College was Andy Cooper who then was the head of their IT Department. We also purchased an option  at the timefor 2 upgrades presumably taking us on to 2010. We don't believe that we used the upgrades.

 

We moved out of the Alchemy Centre at Great Yarmouth College in 2010 to our current address here in Bells Road in Gorleston.

 

We currently have a dilemma. We have purchased 1x Autocad LT 2012 Full Version which upgraded one of the Autocad LT 2008 copies we own. That seems fine apart from the fact it is sluggish with a Microsoft mouse but ok with a dell or other type of mouse.

 

The Autocad lt versions 2011 and 2010 that we have have also been upgraded sucessfully with a LT 2013 upgrades. And now the problem....

 

The remaining Autocad Lt 2008 will not upgrade to 2013 Lt although we purchased the 3x 2013 upgrades at the same time. We have made an enquiry before and believe that your records show that we have a 2009 version running on the workstation that we wish to upgrade to 2013. You will appreciate that it is not possible for us to update the 2008 version on this desktop to 2009 you believe us to have as we never had any disks to run it from.

 

Could you please advise us how this might be resolved as we need to upgrade the 2008 version we have direct to 2013. If you still believe that we are running this 2008 version as an upgrade to 2009 firstly why would we have a copy of 2013 that we are unable currently to use and secondly if it is in your power to disable our version of the 2009 programme that we had a right to but we don't have any detail of then please do so. We can then upgrade our 2008 version and if you suspect that the 2009 is being used either here or elsewhere then it would clearly remove this possibility.

 

Please advise how we might proceed to rectify the problem. Thanks - 

 

Alan Wright / Craigh Page PURE architecture ltd.

PURE design studio, 138 Bell's Road, Gorleston,

Norfolk, NR31 6AG

 

tel. 01493 44 22 04 (UK)

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube