Installation & Licensing

Reply
*Otto, Paul E.
Message 1 of 9 (120 Views)

Problem getting license

120 Views, 8 Replies
11-06-2001 09:49 PM
I can not get a license for the workstation. When I do a server status I
get the following message at the end:

Users of 41100ACD_2002_0F: (Error: 7 licenses, unsupported by licensed
server)

I can not seem to figure out what is wrong. Any Ideas?

Paul
*martin, jason
Message 2 of 9 (120 Views)

Re: Problem getting license

11-06-2001 10:50 PM in reply to: *Otto, Paul E.
Paul -
There is a problem with your adlm.
Stop the adlm service and restart it. Wait a couple of minutes and check the debug.log to try and see what exactly the problem is.
Post the contents of the debug.log if you'd like and we'll try to help you figure out what is going on.

jason

"Paul E. Otto" wrote in message news:2B2875E0C5C5AB20CFAED8881142A707@in.WebX.maYIadrTaRb...
> I can not get a license for the workstation. When I do a server status I
> get the following message at the end:
>
> Users of 41100ACD_2002_0F: (Error: 7 licenses, unsupported by licensed
> server)
>
> I can not seem to figure out what is wrong. Any Ideas?
>
> Paul
>
>
*Otto, Paul E.
Message 3 of 9 (120 Views)

Re:

11-06-2001 11:10 PM in reply to: *Otto, Paul E.
Jason -
Thanks for the quick response. Here is the results of the log file:

9:01:48 (lmgrd) Detecting other lmgrd processes...
9:02:03 (lmgrd) FLEXlm (v7.1f) started on SERVER (IBM PC) (11/7/2001)
9:02:03 (lmgrd) FLEXlm Copyright 1988-2000, Globetrotter Software, Inc.
9:02:03 (lmgrd) US Patents 5,390,297 and 5,671,412.
9:02:03 (lmgrd) World Wide Web: http://www.globetrotter.com
9:02:03 (lmgrd) License file(s): C:\flexlm\license.dat
9:02:03 (lmgrd) lmgrd tcp-port 27000
9:02:03 (lmgrd) Starting vendor daemons ...
9:02:03 (lmgrd) License daemon startup failed:
9:02:03 (lmgrd) File not found, port
9:02:03 (lmgrd) Started adskflex (pid 426)
9:02:03 (adskflex) cannot establish lock - exiting (file:
C:\flexlm\adskflex, errno: 13)

"jason martin" wrote in message
news:6FDE96DF14EDD0D0766106F5B6908846@in.WebX.maYIadrTaRb...
> Paul -
> There is a problem with your adlm.
> Stop the adlm service and restart it. Wait a couple of minutes and check
the debug.log to try and see what exactly the problem is.
> Post the contents of the debug.log if you'd like and we'll try to help you
figure out what is going on.
>
> jason
>
*martin, jason
Message 4 of 9 (120 Views)

Re:

11-06-2001 11:23 PM in reply to: *Otto, Paul E.
Paul -

It looks like there could be a problem with your license file?? The lines
> 9:02:03 (lmgrd) License daemon startup failed:
> 9:02:03 (lmgrd) File not found, port
worry me.

Could you post a copy of your c:\flexlm\license.dat file???

jason

"Paul E. Otto" wrote in message news:2331D574C57BA33BB199527FFB82654E@in.WebX.maYIadrTaRb...
> Jason -
> Thanks for the quick response. Here is the results of the log file:
>
> 9:01:48 (lmgrd) Detecting other lmgrd processes...
> 9:02:03 (lmgrd) FLEXlm (v7.1f) started on SERVER (IBM PC) (11/7/2001)
> 9:02:03 (lmgrd) FLEXlm Copyright 1988-2000, Globetrotter Software, Inc.
> 9:02:03 (lmgrd) US Patents 5,390,297 and 5,671,412.
> 9:02:03 (lmgrd) World Wide Web: http://www.globetrotter.com
> 9:02:03 (lmgrd) License file(s): C:\flexlm\license.dat
> 9:02:03 (lmgrd) lmgrd tcp-port 27000
> 9:02:03 (lmgrd) Starting vendor daemons ...
> 9:02:03 (lmgrd) License daemon startup failed:
> 9:02:03 (lmgrd) File not found, port
> 9:02:03 (lmgrd) Started adskflex (pid 426)
> 9:02:03 (adskflex) cannot establish lock - exiting (file:
> C:\flexlm\adskflex, errno: 13)
*Otto, Paul E.
Message 5 of 9 (120 Views)

Re:

11-06-2001 11:36 PM in reply to: *Otto, Paul E.
SERVER SERVER 00104B6D1910
USE_SERVER
VENDOR adskflex port 80
INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 7 \
VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=H \
ISSUED=1-jul-2001 ck= SN=0-32957503 SIGN=5A75202D22


"jason martin" wrote in message
news:15AE2AB9E155C06E55A2E923BE2B4147@in.WebX.maYIadrTaRb...
> Paul -
>
> It looks like there could be a problem with your license file?? The lines
> > 9:02:03 (lmgrd) License daemon startup failed:
> > 9:02:03 (lmgrd) File not found, port
> worry me.
>
> Could you post a copy of your c:\flexlm\license.dat file???
>
> jason
>
*Wedding, James
Message 6 of 9 (120 Views)

Re:

11-06-2001 11:46 PM in reply to: *Otto, Paul E.
It doesn't look quite like mine. What that means, I don't know. I'm also on
a different port for some reason. That might be causing problems. Ain't it
cool that we can post these since they're tied to the mac address?

SERVER JBI-W2K-SERVER 0050DABACB48
USE_SERVER
VENDOR adskflex port=2080
INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 4 \
VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=H \
ISSUED=30-aug-2001 ck=186 SN=400-32919774 SIGN=A46088FA0A7C

--
James Wedding
IT Manager
Jones & Boyd, Inc.
Dallas, TX
jwedding@*NOSPAM*jones-boyd.com
*martin, jason
Message 7 of 9 (120 Views)

Re:

11-06-2001 11:52 PM in reply to: *Otto, Paul E.
Okay, there are some serious problems with your license file.

SERVER SERVER 00104B6D1910
USE_SERVER
VENDOR adskflex port=2080
INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 7 \
VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=H \
ISSUED=1-jul-2001 ck=*** SN=**0-32957503 SIGN=**5A75202D22

See if you can find the original copy of the license file that autodesk sent you. The vendor string was incorrect, it had lost =20
between the t and the 8. The check sum appears to have been ripped out (although I'm not sure that it is required). Some of the
serial number digits are missing, and I think that you are missing 2 digits from the SIGN, which is the special secret code
generated by autodesk so that I can't create my own license files.

If the email that autodesk sent you matches your license file, then you'll need to call them again and have them send a new one,
cause this one won't work.

hth

jason

"Paul E. Otto" wrote in message news:93B7B814C222EFEBD3F50836F679E4AC@in.WebX.maYIadrTaRb...
> SERVER SERVER 00104B6D1910
> USE_SERVER
> VENDOR adskflex port 80
> INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 7 \
> VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=H \
> ISSUED=1-jul-2001 ck= SN=0-32957503 SIGN=5A75202D22
>
>
> "jason martin" wrote in message
> news:15AE2AB9E155C06E55A2E923BE2B4147@in.WebX.maYIadrTaRb...
> > Paul -
> >
> > It looks like there could be a problem with your license file?? The lines
> > > 9:02:03 (lmgrd) License daemon startup failed:
> > > 9:02:03 (lmgrd) File not found, port
> > worry me.
> >
> > Could you post a copy of your c:\flexlm\license.dat file???
> >
> > jason
> >
>
>
>
*Otto, Paul E.
Message 8 of 9 (120 Views)

Re:

11-06-2001 11:53 PM in reply to: *Otto, Paul E.
It sure helps to post and try to figure out problems.

My old ADLM is using port 1422, does this matter. By the way I am using a
NT SP6 machine and am also running adlm server for acad 2000i. If it
matters. Thanks
*Otto, Paul E.
Message 9 of 9 (120 Views)

Re:

11-07-2001 12:01 AM in reply to: *Otto, Paul E.
Thanks for the help. I could not see what I was doing wrong and it appears
I may not have been doing anything wrong. That is how it came from
AutoDesk, must have gotten messed up in the email somehow.


"jason martin" wrote in message
news:08D2F813E3BEB14545B6F4FE84348FB7@in.WebX.maYIadrTaRb...
> Okay, there are some serious problems with your license file.
>
> SERVER SERVER 00104B6D1910
> USE_SERVER
> VENDOR adskflex port=2080
> INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 7 \
> VENDOR_STRING=commercial:smileytongue:ermanent SUPERSEDE DUP_GROUP=H \
> ISSUED=1-jul-2001 ck=*** SN=**0-32957503 SIGN=**5A75202D22
>
> See if you can find the original copy of the license file that autodesk
sent you. The vendor string was incorrect, it had lost =20
> between the t and the 8. The check sum appears to have been ripped out
(although I'm not sure that it is required). Some of the
> serial number digits are missing, and I think that you are missing 2
digits from the SIGN, which is the special secret code
> generated by autodesk so that I can't create my own license files.
>
> If the email that autodesk sent you matches your license file, then you'll
need to call them again and have them send a new one,
> cause this one won't work.
>
> hth
>
> jason
>

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube