I've tried just about everything I could find on the internet for a solution to this and still no luck. (Including deleting temp, registry fix, updates, .NET Framework checking, and others).
Solved! Go to Solution.
Please refer to the following post from the Windows Seven Forums regarding a similar issue when installing the Microsoft Visual C++ Redistributable package:
The posting indicates that the following steps will resolve the issue:
Value: 0xffffff (4294967295)
As a Administrator open a Command Prompt and run "SFC /SCANNOW". The command should complete successfully and if any errors were found, they should be corrected.
It is always strongly recommended to fully back up the registry prior to making any modifications.
I hope this helps.
Any chance you could give me some steps to perform this?
I did what I thought would be correct.
- Backed up the registry
- went to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control
-created key RegistrySizeLimit
-set type to REG_DWORD
-set vaulue to 0xffffff (4294967295)
-performed clean boot
xx Failed with the same error message at the same point
Just uninstall your Visual C++ and run the installer again.
Travis, I removed Visual C++ as you stated then attempted a reinstall. No luck. So i removed more (because well... why not) after restarting and having attempted another isntall.
The only thing that changed was now Autodesk Design Review installed, but still no inventor.
You have admin rights? UAC off? Antivirus disabled? Media or download install?
Admin Rights - check (even used install as admin during setup just to rule it out)
UAC - off
Microsoft Security Essentials - off
No other anti virus has ever been installed or used, I just freeze my C:
It's the download install - here is some log file. Thanks for your help as well
2012/2/28:16:59:06 Robert Hudson ROBERTHUDSON Inventorui== Parameter: Page2 Action: SetMsiProperty Item: PRODUCTEDITION Value:INVPROSA
2012/2/28:16:59:06 Robert Hudson ROBERTHUDSON PageOpen ProductSelectionDialog2
2012/2/28:16:59:27 Robert Hudson ROBERTHUDSON PageOpen FullProgressDialog
2012/2/28:16:59:27 Robert Hudson ROBERTHUDSON Installing DirectX® Runtime: C:\Autodesk\Autodesk_Inventor_2012_English_Win_64b
2012/2/28:16:59:51 Robert Hudson ROBERTHUDSON Install DirectX® Runtime Succeeded
2012/2/28:16:59:51 Robert Hudson ROBERTHUDSON Installing Microsoft Windows Media Format 9.5 Series Runtime: C:\Autodesk\Autodesk_Inventor_2012_English_Win_64b
2012/2/28:16:59:54 Robert Hudson ROBERTHUDSON Install Microsoft Windows Media Format 9.5 Series Runtime Failed Failure is ignored, Result=1603
2012/2/28:16:59:54 Robert Hudson ROBERTHUDSON Installing Autodesk® Inventor® 2012: TRANSFORMS="C:\Autodesk\Autodesk_Inventor_2012_Eng
2012/2/28:17:05:33 Robert Hudson ROBERTHUDSON Install Autodesk® Inventor® 2012 Failed Installation aborted, Result=1603
2012/2/28:17:05:33 Robert Hudson ROBERTHUDSON Rollback DirectX® Runtime Failed Failure is ignored, Result=1619
So looking at the logs, I actually paid attention and noticed that the error occured when installing file at path
which is microsoft windows media something or other 9.5? So i found that path, attempted a manual install, but i get error message "not enough storage is available to process this command" I assume this is where the real issue lies but again, I have no idea what to do /: