Installation & Licensing

Reply
*Veilleux, Michael
Message 1 of 6 (186 Views)

Here's a stupid question about Auth codes...

186 Views, 5 Replies
01-22-2003 11:15 PM
Received the authorization code for CAD Overlay....but forgot where to put
it???

I set up ACAD and Land Desktop so long ago on our server.....

ACAD 2002 on NT server....

the auth code looks something like this:

SERVER xxxxxxxxxxx
USE_SERVER
VENDOR adskflex port=xxxx
INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
*Parsons, Erin
Message 2 of 6 (186 Views)

Re: Here's a stupid question about Auth codes...

01-23-2003 01:18 AM in reply to: *Veilleux, Michael
Stop the lmtools and locate your license file. Make a back up copy of your
license file. Then add the last three lines of the CAD Overlay
Authorization to your current license file.

Example:
> SERVER xxxxxxxxxxx
> USE_SERVER
> VENDOR adskflex port=xxxx
> INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 1 \
> VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> ISSUED=xxxxxxxxxxxxx
> INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
> ISSUED=xxxxxxxxxxxx

Start the lmtools and reread the license file.



Michael Veilleux" wrote in message
news:9932682C205268486EDCD93B8BAEAD35@in.WebX.maYIadrTaRb...
> Received the authorization code for CAD Overlay....but forgot where to put
> it???
>
> I set up ACAD and Land Desktop so long ago on our server.....
>
> ACAD 2002 on NT server....
>
> the auth code looks something like this:
>
> SERVER xxxxxxxxxxx
> USE_SERVER
> VENDOR adskflex port=xxxx
> INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>
>
*Veilleux, Michael
Message 3 of 6 (186 Views)

Re:

01-23-2003 02:18 AM in reply to: *Veilleux, Michael
thanks for your reply.......where is lmtools????


" Erin Parsons" wrote in message
news:A3632DC0B29CA31F21003BA8B36D1902@in.WebX.maYIadrTaRb...
> Stop the lmtools and locate your license file. Make a back up copy of
your
> license file. Then add the last three lines of the CAD Overlay
> Authorization to your current license file.
>
> Example:
> > SERVER xxxxxxxxxxx
> > USE_SERVER
> > VENDOR adskflex port=xxxx
> > INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > ISSUED=xxxxxxxxxxxxx
> > INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
> > ISSUED=xxxxxxxxxxxx
>
> Start the lmtools and reread the license file.
>
>
>
> Michael Veilleux" wrote in message
> news:9932682C205268486EDCD93B8BAEAD35@in.WebX.maYIadrTaRb...
> > Received the authorization code for CAD Overlay....but forgot where to
put
> > it???
> >
> > I set up ACAD and Land Desktop so long ago on our server.....
> >
> > ACAD 2002 on NT server....
> >
> > the auth code looks something like this:
> >
> > SERVER xxxxxxxxxxx
> > USE_SERVER
> > VENDOR adskflex port=xxxx
> > INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >
> >
>
>
*Veilleux, Michael
Message 4 of 6 (186 Views)

Re:

01-23-2003 04:44 AM in reply to: *Veilleux, Michael
OK...I found lmtools in the FLexLM driectory on our server......BUT..

when I go to the stop/reread tab, and look on the left under "remote server
list"..there is nothing there....and in the grey box is a message that says
"license file not specified"

so I am not sure what to do....does this mean It cannot find my license
file? Where would it be?




" Erin Parsons" wrote in message
news:A3632DC0B29CA31F21003BA8B36D1902@in.WebX.maYIadrTaRb...
> Stop the lmtools and locate your license file. Make a back up copy of
your
> license file. Then add the last three lines of the CAD Overlay
> Authorization to your current license file.
>
> Example:
> > SERVER xxxxxxxxxxx
> > USE_SERVER
> > VENDOR adskflex port=xxxx
> > INCREMENT 41100ACD_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> > ISSUED=xxxxxxxxxxxxx
> > INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
> > ISSUED=xxxxxxxxxxxx
>
> Start the lmtools and reread the license file.
>
>
>
> Michael Veilleux" wrote in message
> news:9932682C205268486EDCD93B8BAEAD35@in.WebX.maYIadrTaRb...
> > Received the authorization code for CAD Overlay....but forgot where to
put
> > it???
> >
> > I set up ACAD and Land Desktop so long ago on our server.....
> >
> > ACAD 2002 on NT server....
> >
> > the auth code looks something like this:
> >
> > SERVER xxxxxxxxxxx
> > USE_SERVER
> > VENDOR adskflex port=xxxx
> > INCREMENT 40700CADOV_2002_0F adskflex 1.000 permanent 1 \
> > VENDOR_STRING=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >
> >
>
>
Active Member
tstuart
Posts: 8
Registered: ‎01-24-2003
Message 5 of 6 (186 Views)

Re: Here's a stupid question about Auth codes...

01-24-2003 02:15 AM in reply to: *Veilleux, Michael
On the first tab of the LMtools is configure using services, that has to be selected.
*Veilleux, Michael
Message 6 of 6 (186 Views)

Re:

01-27-2003 09:57 PM in reply to: *Veilleux, Michael
Thanks for your help.....I am all set
now!!!


style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
On
the first tab of the LMtools is configure using services, that has to be
selected.

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube