Installation & Licensing

Reply
*Hoffmann, Peer
Message 1 of 4 (66 Views)

FlexLM with AIS5 and AIS6 simultaniously?

66 Views, 3 Replies
11-11-2002 04:39 PM
I've received a new license file for AIS6.
While transition and migration takes place I would like to run both AIS5 and
AIS6 at the same time.
Can I copy/paste the new license file into the old AIS5 license file (except
the first two lines) and go from there without problems?

Please advise,
Peer Hoffmann
CAD/CAM System Manager
Ambu International
*milana, jerry
Message 2 of 4 (66 Views)

Re: FlexLM with AIS5 and AIS6 simultaniously?

11-11-2002 08:47 PM in reply to: *Hoffmann, Peer
Yes, you can do this so long as you remove the AIS5 license after 30 days
which is the transition period allowed by the license agreement.

jerry milana
Autodesk Professional Services


"Peer Hoffmann" wrote in message
news:B365CC476BD55EEF56DFEE0E0325E718@in.WebX.maYIadrTaRb...
> I've received a new license file for AIS6.
> While transition and migration takes place I would like to run both AIS5
and
> AIS6 at the same time.
> Can I copy/paste the new license file into the old AIS5 license file
(except
> the first two lines) and go from there without problems?
>
> Please advise,
> Peer Hoffmann
> CAD/CAM System Manager
> Ambu International
>
>
*Hoffmann, Peer
Message 3 of 4 (66 Views)

Re:

11-11-2002 09:05 PM in reply to: *Hoffmann, Peer
Thanks, Jerry

I will then do this when Iv6 SP1 is available (the 15th.?)

BR
Peer


"jerry milana" wrote in message
news:66E58C19836FB1C0FA2D2FA5B0E78DB3@in.WebX.maYIadrTaRb...
> Yes, you can do this so long as you remove the AIS5 license after 30 days
> which is the transition period allowed by the license agreement.
>
> jerry milana
> Autodesk Professional Services
>
>
> "Peer Hoffmann" wrote in message
> news:B365CC476BD55EEF56DFEE0E0325E718@in.WebX.maYIadrTaRb...
> > I've received a new license file for AIS6.
> > While transition and migration takes place I would like to run both AIS5
> and
> > AIS6 at the same time.
> > Can I copy/paste the new license file into the old AIS5 license file
> (except
> > the first two lines) and go from there without problems?
> >
> > Please advise,
> > Peer Hoffmann
> > CAD/CAM System Manager
> > Ambu International
> >
> >
>
>
Member
kadkomp
Posts: 5
Registered: ‎05-21-2003
Message 4 of 4 (66 Views)

Re:

02-05-2003 10:12 PM in reply to: *Hoffmann, Peer
Dear Sir,
We are also facing same problem
i am also want to configure the AIS 5 & AIS 6
on single server on single flexlm license manager
for continiously
So Please give me the solution

Regards,
NINAD
Kadkomp

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube