Installation & Licensing
Welcome to Autodesk’s Installation and Licensing Forums. Share your knowledge, ask questions, and explore popular Download, Installation, and Licensing topics.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

FlexLM with AIS5 and AIS6 simultaniously?

3 REPLIES 3
Reply
Message 1 of 4
Anonymous
170 Views, 3 Replies

FlexLM with AIS5 and AIS6 simultaniously?

I've received a new license file for AIS6.
While transition and migration takes place I would like to run both AIS5 and
AIS6 at the same time.
Can I copy/paste the new license file into the old AIS5 license file (except
the first two lines) and go from there without problems?

Please advise,
Peer Hoffmann
CAD/CAM System Manager
Ambu International
3 REPLIES 3
Message 2 of 4
Anonymous
in reply to: Anonymous

Yes, you can do this so long as you remove the AIS5 license after 30 days
which is the transition period allowed by the license agreement.

jerry milana
Autodesk Professional Services


"Peer Hoffmann" wrote in message
news:B365CC476BD55EEF56DFEE0E0325E718@in.WebX.maYIadrTaRb...
> I've received a new license file for AIS6.
> While transition and migration takes place I would like to run both AIS5
and
> AIS6 at the same time.
> Can I copy/paste the new license file into the old AIS5 license file
(except
> the first two lines) and go from there without problems?
>
> Please advise,
> Peer Hoffmann
> CAD/CAM System Manager
> Ambu International
>
>
Message 3 of 4
Anonymous
in reply to: Anonymous

Thanks, Jerry

I will then do this when Iv6 SP1 is available (the 15th.?)

BR
Peer


"jerry milana" wrote in message
news:66E58C19836FB1C0FA2D2FA5B0E78DB3@in.WebX.maYIadrTaRb...
> Yes, you can do this so long as you remove the AIS5 license after 30 days
> which is the transition period allowed by the license agreement.
>
> jerry milana
> Autodesk Professional Services
>
>
> "Peer Hoffmann" wrote in message
> news:B365CC476BD55EEF56DFEE0E0325E718@in.WebX.maYIadrTaRb...
> > I've received a new license file for AIS6.
> > While transition and migration takes place I would like to run both AIS5
> and
> > AIS6 at the same time.
> > Can I copy/paste the new license file into the old AIS5 license file
> (except
> > the first two lines) and go from there without problems?
> >
> > Please advise,
> > Peer Hoffmann
> > CAD/CAM System Manager
> > Ambu International
> >
> >
>
>
Message 4 of 4
kadkomp
in reply to: Anonymous

Dear Sir,
We are also facing same problem
i am also want to configure the AIS 5 & AIS 6
on single server on single flexlm license manager
for continiously
So Please give me the solution

Regards,
NINAD
Kadkomp

Can't find what you're looking for? Ask the community or share your knowledge.

Post to forums  

Administrator Productivity


Autodesk Design & Make Report