Installation & Licensing

Reply
Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 11 of 25 (5,160 Views)

Re: Error 1606. Could not access network location Setup.

04-02-2013 10:56 AM in reply to: Alfred.NESWADBA

If it again fails, please upload the log-file that was created during the AutoCAD-installation.

 

- alfred -



It failed again.  Where do I find this log file?

 

Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 12 of 25 (5,156 Views)

Re: Error 1606. Could not access network location Setup.

04-02-2013 11:14 AM in reply to: msmallmn

Found it.

 

2013/4/2:12:05:02	msmall	ESI069	=== Setup started on ESI069 by msmall ===
2013/4/2:12:05:02	msmall	ESI069	Launch 
2013/4/2:12:05:08	msmall	ESI069	=== Setup ended ===

2013/4/2:12:05:16	msmall	ESI069	=== Setup started on ESI069 by msmall ===
2013/4/2:12:05:16	msmall	ESI069	Launch 
2013/4/2:12:05:19	msmall	ESI069	=== Setup ended ===

2013/4/2:12:05:17	msmall	ESI069	=== Setup started on ESI069 by msmall ===
2013/4/2:12:05:17	msmall	ESI069	Launch 
2013/4/2:12:05:19	msmall	ESI069	PageOpen	LaunchDialog		
2013/4/2:12:05:20	msmall	ESI069	PageOpen	LicenseDialog		
2013/4/2:12:05:23	msmall	ESI069	PageOpen	ProductInfoDialog		
2013/4/2:12:06:14	msmall	ESI069	PageOpen	ProductSelectionDialog2		
2013/4/2:12:06:29	msmall	ESI069	PageOpen	FullProgressDialog		
2013/4/2:12:06:29	msmall	ESI069	Installing Autodesk® Design Review 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x86\en-us\Components\adr2013\SetupDesignReview2013-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files (x86)\Autodesk\Autodesk Design Review 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:06:42	msmall	ESI069	Install	Autodesk® Design Review 2013	Succeeded	
2013/4/2:12:06:42	msmall	ESI069	Installing DirectX Runtime: C:\AutoCAD Design Suite\3rdParty\DirectX\DXSETUP.exe /silent
2013/4/2:12:08:05	msmall	ESI069	Install	DirectX Runtime	Succeeded	
2013/4/2:12:08:06	msmall	ESI069	Installing Autodesk® Material Library 2013 - Medium Resolution Image Library:   ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:08:29	msmall	ESI069	Install	Autodesk® Material Library 2013 - Medium Resolution Image Library	Succeeded	
2013/4/2:12:08:29	msmall	ESI069	Installing Autodesk DirectConnect 2013:   ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:09:23	msmall	ESI069	Install	Autodesk DirectConnect 2013	Succeeded	
2013/4/2:12:09:24	msmall	ESI069	Installing Autodesk® Showcase® 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x64\Showcase\AutodeskShowcase7.0-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files\Autodesk\Showcase 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:14:49	msmall	ESI069	Install	Autodesk® Showcase® 2013	Succeeded	
2013/4/2:12:14:49	msmall	ESI069	Installing Autodesk® SketchBook® Designer 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x64\SBD\SBD-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files\Autodesk\SketchBookDesigner2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:15:55	msmall	ESI069	Install	Autodesk® SketchBook® Designer 2013	Succeeded	
2013/4/2:12:15:55	msmall	ESI069	Installing Autodesk® SketchBook® Designer for AutoCAD® 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x64\SBDACAD\SBDACAD-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files\Autodesk\ApplicationPlugins\SBD.bundle\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:16:19	msmall	ESI069	Install	Autodesk® SketchBook® Designer for AutoCAD® 2013	Succeeded	
2013/4/2:12:16:20	msmall	ESI069	Installing Autodesk® Mudbox® 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x64\Mudbox\Mudbox2013.0-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files\Autodesk\Mudbox 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:17:31	msmall	ESI069	Install	Autodesk® Mudbox® 2013	Succeeded	
2013/4/2:12:17:31	msmall	ESI069	Installing Autodesk® Raster Design 2013:  TRANSFORMS="C:\Users\msmall\AppData\Local\Temp\_AI3084.tmp\x64\Raster\Raster-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="C:\AutoCAD Design Suite\" INSTALLDIR="C:\Program Files\Autodesk\AutoCAD Raster Design 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

 2013/4/2:12:18:46	msmall	ESI069	Install	Autodesk® Raster Design 2013	Failed	Installation aborted, Result=1603
2013/4/2:12:19:10	msmall	ESI069	Rollback	Autodesk® Mudbox® 2013	Succeeded	
2013/4/2:12:19:25	msmall	ESI069	Rollback	Autodesk® SketchBook® Designer for AutoCAD® 2013	Succeeded	
2013/4/2:12:20:16	msmall	ESI069	Rollback	Autodesk® SketchBook® Designer 2013	Succeeded	
2013/4/2:12:21:53	msmall	ESI069	Rollback	Autodesk® Showcase® 2013	Succeeded	
2013/4/2:12:22:13	msmall	ESI069	Rollback	Autodesk DirectConnect 2013	Succeeded	
2013/4/2:12:22:18	msmall	ESI069	Rollback	Autodesk® Material Library 2013 - Medium Resolution Image Library	Succeeded	
2013/4/2:12:22:18	msmall	ESI069	Rollback	DirectX Runtime	Failed	Failure is ignored, Result=1619
2013/4/2:12:22:24	msmall	ESI069	Rollback	Autodesk® Design Review 2013	Succeeded	
2013/4/2:12:22:24	msmall	ESI069	PageOpen	InstallCompleteDialog		
2013/4/2:12:49:20	msmall	ESI069	=== Setup ended ===

2013/4/2:12:51:15	msmall	ESI069	=== Setup started on ESI069 by msmall ===
2013/4/2:12:51:15	msmall	ESI069	Launch 
2013/4/2:12:51:18	msmall	ESI069	=== Setup ended ===

 

*Expert Elite*
Alfred.NESWADBA
Posts: 8,916
Registered: ‎06-29-2007
Message 13 of 25 (5,150 Views)

Re: Error 1606. Could not access network location Setup.

04-02-2013 12:20 PM in reply to: msmallmn

Hi,

 

first failure I see is Raster-Design. Try to disable "Raster Design" from the list of products to be installed and try it again.

 

- alfred -

-------------------------------------------------------------------------
Alfred NESWADBA
Ingenieur Studio HOLLAUS ... www.hollaus.at
-------------------------------------------------------------------------
Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 14 of 25 (5,130 Views)

Re: Error 1606. Could not access network location Setup.

04-03-2013 11:18 AM in reply to: Alfred.NESWADBA

Would this headache go away if I were to install it with a local profile on this machine?

Employee
DannyHubbard
Posts: 255
Registered: ‎05-17-2007
Message 15 of 25 (5,101 Views)

Re: Error 1606. Could not access network location Setup.

04-08-2013 10:45 AM in reply to: msmallmn

With a local profile everything should install fine.

 

Check out the following section from http://usa.autodesk.com/getdoc/id=TS1055299

Folder redirection

 

There are several ways to redirect certain folders from within the user profile, including (but not limited to) the Start Menu, My Documents or Temp folders. This customization can be done directly on the computer or with network management software, such as Microsoft Active Directory and Group Policies. These types of customizations can cause failures in the AutoCAD secondary installer which might result in error messages, such as Error 1606: Unable to access network location. To correct this issue, you should remove folder redirection from the user, reboot the machine, and then try to run AutoCAD again.

 

 

Thanks,

Danny



Danny Hubbard
QA Analyst
Autodesk, Inc.
Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 16 of 25 (5,097 Views)

Re: Error 1606. Could not access network location Setup.

04-08-2013 11:26 AM in reply to: DannyHubbard

DannyHubbard wrote:

With a local profile everything should install fine.

 

Check out the following section from http://usa.autodesk.com/getdoc/id=TS1055299

Folder redirection

 

There are several ways to redirect certain folders from within the user profile, including (but not limited to) the Start Menu, My Documents or Temp folders. This customization can be done directly on the computer or with network management software, such as Microsoft Active Directory and Group Policies. These types of customizations can cause failures in the AutoCAD secondary installer which might result in error messages, such as Error 1606: Unable to access network location. To correct this issue, you should remove folder redirection from the user, reboot the machine, and then try to run AutoCAD again.

 

 

Thanks,

Danny


Thanks a lot Danny! I'll see if I can't have that folder redirection disabled temporarily, or just use a local profile to install with.

New Member
MarioVanceti
Posts: 2
Registered: ‎04-11-2013
Message 17 of 25 (5,052 Views)

Re: Error 1606. Could not access network location Setup.

04-11-2013 12:57 PM in reply to: msmallmn

Hi,

Same problem – I have tried everything I found on internet,  but no change. Then I’ve decide to create a new user account, and Acad 2014 installation had no problems. After that I simply switch to the original user account and Acad 2014 installation was OK on this user account as well.  That’s how it works for me (Win 7x64 – Autocad 2014x64):

  1. Go to user accounts and create a new account as Administrator
  2. Log on with new account
  3. After logon go to Switch user and Go back to the original account
  4. That’s it – now you can install Acad 2014  with original account

It works for me – I hope it works for you either

 

Member
latimersd
Posts: 4
Registered: ‎12-08-2010
Message 18 of 25 (5,041 Views)

Re: Error 1606. Could not access network location Setup.

04-11-2013 05:09 PM in reply to: msmallmn

I appreciate your helpful replies. That said, I would like to take a moment to rant regarding AutoDesk's need to make this sort of thing so difficult and internally complex. Why do we need a 12-step process to load a viewer?! Perhaps there could be a "light" version for those of us relatively normal users who do not care to use all the accessory applicatiions AutoDesks thinks we need or would like us to use. My goodness! Give me a one-file download that does not rely on three other products that also have to be installed. Just let me load and look at a DWG.

 

-Cheers-    

Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 19 of 25 (5,024 Views)

Re: Error 1606. Could not access network location Setup.

04-12-2013 07:49 AM in reply to: MarioVanceti

MarioVanceti wrote:

Hi,

Same problem – I have tried everything I found on internet,  but no change. Then I’ve decide to create a new user account, and Acad 2014 installation had no problems. After that I simply switch to the original user account and Acad 2014 installation was OK on this user account as well.  That’s how it works for me (Win 7x64 – Autocad 2014x64):

  1. Go to user accounts and create a new account as Administrator
  2. Log on with new account
  3. After logon go to Switch user and Go back to the original account
  4. That’s it – now you can install Acad 2014  with original account

It works for me – I hope it works for you either

 


This is what I'm trying next.  Our IT guys wanted to try something else, but I still got the same error.

Contributor
msmallmn
Posts: 21
Registered: ‎02-17-2003
Message 20 of 25 (5,020 Views)

Re: Error 1606. Could not access network location Setup.

04-12-2013 11:45 AM in reply to: msmallmn

Well, ended up disabling roaming profiles and folder redirection. So now I have a local profile.  This appears to have solved the issue. Everything seems to have installed properly and is working correctly. It even corrected the problem I was having with properties not displaying for the selected object.

 

IMO it's poor programming on AutoDesk's part to not be able to account for that. It seems like it's a pretty common IT practice.

 

Thank you to those who helped out!

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube