Installation & Licensing

Reply
Distinguished Contributor
cadfish1
Posts: 565
Registered: ‎02-12-2009
Message 1 of 7 (318 Views)
Accepted Solution

Error 1304 while creating a deployment

318 Views, 6 Replies
10-31-2012 12:11 PM

i'm creating a deplyment out on the network but I receive the following 1304 error:

!temp1.jpg

 

I have full access rights to the root folder \\SLBF0004\Engineering\Cadapp\PDSP2013\deploy\64. 

Distinguished Mentor
john.retzlaff
Posts: 894
Registered: ‎11-03-2003
Message 2 of 7 (308 Views)

Re: Error 1304 while creating a deployment

10-31-2012 01:40 PM in reply to: cadfish1

Try a shorter path to your deployment directory. 

John Retzlaff
Product Support
dembkod
Posts: 503
Registered: ‎05-26-2010
Message 3 of 7 (279 Views)

Re: Error 1304 while creating a deployment

11-01-2012 07:30 AM in reply to: cadfish1

Cookml,

Hello. This type of error is often due to path depth. I believe you may be running into windows depth limitations.

http://upandready.typepad.com/up_and_ready/2011/05/error-1603-and-1304-during-deployment-creation-re...

http://upandready.typepad.com/up_and_ready/2012/04/autodesk-suites-2013-deployment-path-can-easily-e...

If you shorten your deployment path you may complete.

Thank you for taking part in our community!

 

David Dembkoski

ADSK_logo_S_black_web.png 

Product Support Specialist

Autodesk Product Support



David Dembkoski
Distinguished Contributor
cadfish1
Posts: 565
Registered: ‎02-12-2009
Message 4 of 7 (266 Views)

Re: Error 1304 while creating a deployment

11-01-2012 10:49 AM in reply to: dembkod

\\slbf0004\Engineering\Cadapp\PDSP2013\deploy

 

Thanks John and David, you were right.  However my path is pretty short already.  It's difficult for me to make much shorter.  \\slbf0004\Engineering is the root on the drive which can't be changed and represent almost half the number of characters in the original path.  The remaining folder names in the part are all pretty short.  Do you have any recommendations on how I can structure the folder on this drive?

Product Support
dembkod
Posts: 503
Registered: ‎05-26-2010
Message 5 of 7 (264 Views)

Re: Error 1304 while creating a deployment

11-01-2012 10:54 AM in reply to: cadfish1

Cadfish1,

Hello. You should be able to know with a simple test. Go shorter. \\deploy\ and try to build to this folder. Your existing path takes up 20% of the Microsoft limit currently.

 

David Dembkoski

ADSK_logo_S_black_web.png 

Product Support Specialist

Autodesk Product Support



David Dembkoski
Distinguished Contributor
cadfish1
Posts: 565
Registered: ‎02-12-2009
Message 6 of 7 (262 Views)

Re: Error 1304 while creating a deployment

11-01-2012 11:01 AM in reply to: dembkod

Are you saying the path should be \\slbf0004\engineering\deploy?  I did something similar and it worked but I can use that folder because I have several deployments (vault, acad/Inventor, algor) in both 64 and 32 bit.

*Expert Elite*
TravisNave
Posts: 9,936
Registered: ‎01-14-2005
Message 7 of 7 (246 Views)

Re: Error 1304 while creating a deployment

11-02-2012 08:44 AM in reply to: cadfish1

cadfish1 wrote:

Are you saying the path should be \\slbf0004\engineering\deploy?  I did something similar and it worked but I can use that folder because I have several deployments (vault, acad/Inventor, algor) in both 64 and 32 bit.


Don't worry about the PHYSICAL path, if you have some sort of ISO policy that designates folder locations.  You can share the last folder itself \Deploy and the UNC path will just be \\slbf0004\deploy even if the physical path location is deep like your original path.  The misconception about folder location and shares is that you have to share the top level folder and this is not correct.  Place it where you want it to go, and share the last folder.  The whole point of shares is to make it easy to get to a folder location on the network.  If you still have to traverse a million folders, you're defeating the purpose.  Share the last folder.  Problem solved. 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube