Installation & Licensing

Reply
Distinguished Contributor
molokaiboy
Posts: 636
Registered: ‎12-10-2003
Message 1 of 7 (116 Views)

CAD Managers NG?

116 Views, 6 Replies
08-27-2001 11:26 AM
Is there a CAD Managers News Group????

TIA

Collin
*martin, jason
Message 2 of 7 (116 Views)

Re: CAD Managers NG?

08-27-2001 09:32 PM in reply to: molokaiboy
Collin -

Why yes. Yes there is.

Try news://discussion.autodesk.com/pn.cadmanager if you are using a news reader or if you
must use the web based groups (I was going to insert a hyperlink here to the web based
cadmanager ng, but I can't get the web version to work this a.m., so start at
http://discussion.autodesk.com and look for a pn.cadmanager).

hth

jason martin

"molokaiboy" wrote in message news:f078bab.-1@WebX.maYIadrTaRb...
> Is there a CAD Managers News Group????
>
> TIA
>
> Collin
>
>
*Prettyman, Charles
Message 3 of 7 (116 Views)

Re:

08-29-2001 12:28 AM in reply to: molokaiboy
What would this NG be wiyhout you, Jason. I hope AutoDesk is giving you a
stipend for all the support you provide.


"jason martin" wrote in message
news:7A4538CE501B57638DA17BD976ACE893@in.WebX.maYIadrTaRb...
> Collin -
>
> Why yes. Yes there is.
>
> Try news://discussion.autodesk.com/pn.cadmanager if you are using a news
reader or if you
> must use the web based groups (I was going to insert a hyperlink here to
the web based
> cadmanager ng, but I can't get the web version to work this a.m., so start
at
> http://discussion.autodesk.com and look for a pn.cadmanager).
>
> hth
>
> jason martin
>
> "molokaiboy" wrote in message
news:f078bab.-1@WebX.maYIadrTaRb...
> > Is there a CAD Managers News Group????
> >
> > TIA
> >
> > Collin
> >
> >
>
>
*martin, jason
Message 4 of 7 (116 Views)

Re:

08-29-2001 02:08 AM in reply to: molokaiboy
The group was here before me and I'm sure it will be here after.
The autodesk guys that hang out here are also very helpful. (I've learned a lot from just
sitting back and reading their posts). I usually just beat them to the answers (that I
know). They generally sweep in and answer the posts that don't have answers as they have
time.
They are also extremely nice when they correct stuff that I get WRONG, so my thanks go to
Jerry, Simon, Bud, Shaan and the other 'deskers that participate, as well as the
non-autodesk people that answer stuff here (and elsewhere), including but not limited to
Kevin, Skip, James, and others (you know who you are).

Thanks for the encouragement Charles.

c'ya

jason

"Charles Prettyman" wrote in message
news:5275ABCA8D77F99781A9C61145E81116@in.WebX.maYIadrTaRb...
> What would this NG be wiyhout you, Jason. I hope AutoDesk is giving you a
> stipend for all the support you provide.
>
>
*Prettyman, Charles
Message 5 of 7 (116 Views)

Re:

08-29-2001 02:50 AM in reply to: molokaiboy
Like you, I have learned a lot from hanging out and reading the NG's. Now I
just need to get my bosses to send me to Vegas for AU, so I can buy a round
of beers for all those who have helped me out.


"jason martin" wrote in message
news:071BD135FEEDF6EAE90EE9EE9F8CDB75@in.WebX.maYIadrTaRb...
> The group was here before me and I'm sure it will be here after.
> The autodesk guys that hang out here are also very helpful. (I've learned
a lot from just
> sitting back and reading their posts). I usually just beat them to the
answers (that I
> know). They generally sweep in and answer the posts that don't have
answers as they have
> time.
> They are also extremely nice when they correct stuff that I get WRONG, so
my thanks go to
> Jerry, Simon, Bud, Shaan and the other 'deskers that participate, as well
as the
> non-autodesk people that answer stuff here (and elsewhere), including but
not limited to
> Kevin, Skip, James, and others (you know who you are).
>
> Thanks for the encouragement Charles.
>
> c'ya
>
> jason
>
> "Charles Prettyman" wrote in message
> news:5275ABCA8D77F99781A9C61145E81116@in.WebX.maYIadrTaRb...
> > What would this NG be wiyhout you, Jason. I hope AutoDesk is giving you
a
> > stipend for all the support you provide.
> >
> >
>
>
>
*Wedding, James
Message 6 of 7 (116 Views)

Re:

08-29-2001 05:02 AM in reply to: molokaiboy
With all the rounds we owe each other, it's a wonder that any of us make it
to class at AU. Just save them up for the last night like we did last
year and we'll have a ball!

--
James Wedding
Jones & Boyd, Inc.
Dallas, Texas
jwedding@NOPSPAMjones-boyd.com
REMOVE NOSPAM FOR REPLY
Distinguished Contributor
molokaiboy
Posts: 636
Registered: ‎12-10-2003
Message 7 of 7 (116 Views)

Re:

08-29-2001 07:00 AM in reply to: molokaiboy
got it. thanks for your help.

collin

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube