Installation & Licensing

Reply
*Expert Elite*
TravisNave
Posts: 9,930
Registered: ‎01-14-2005
Message 1 of 70 (10,161 Views)
Accepted Solution

Autodesk Network License Manager 2014

10161 Views, 69 Replies
04-01-2013 10:00 AM

Well, it's that time again.  Time to update your Autodesk Network License Manager files to the latest and greatest (Autodesk) version.

 

Autodesk is providing version 11.11 for 2014 products.

 

You can get the Autodesk Network License Manager files here for both 32-bit and 64-bit versions:

 

http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=18610121&linkID=12305695

 

You can always get the latest version of the NLM from the following link:

 

http://www.globes.com/support/fnp_utilities_download.htm

 

At the time of this post, the latest version is 11.11.1, which is newer than the version supplied by Autodesk.  I am attaching the necessary 32-bit adskflex vendor daemon file in this message (v11.11) for your convenience.  You can use this file if you are using the Flexera License Administrator instead of LMTOOLS.  You can find the FLEXnet License Admin also in the link above.  I will post the 64-bit adskflex.exe vendor daemon file in a follow-up post below.

 

 

You can update your license file to 2014 versions once your Subscription has been fulfilled. 

 

You can use the online method to activate your license here:

http://usa.autodesk.com/adsk/servlet/pc/item?id=18424632&siteID=123112

Or you can can call Autodesk Product Registration and Authorization:

http://en.autodesk.ca/adsk/servlet/index?siteID=9719649&id=9830778

1-800-551-1490 > Option 1 (English) > Option 2 > (Network)

Asia / Pacific: 65.6735.5688
Europe / Middle East / Asia: 41.32.723.9595

You will need to provide your serial number and ethernet ID of the new license server.

For a Quick-Start Guide on configuring the Autodesk License Manager, please see my post for further information:

http://forums.autodesk.com/t5/Installation-Licensing/Quick-Start-Guide-for-Configuring-LMTOOLS/m-p/3...

 

 

Good Luck!

 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
*Expert Elite*
TravisNave
Posts: 9,930
Registered: ‎01-14-2005
Message 2 of 70 (10,156 Views)

Re: Autodesk Network License Manager 2014

04-01-2013 10:06 AM in reply to: TravisNave

For those of you who need the 64-bit version of the adskflex.exe vendor daemon for your LMTOOLS update or FLEXnet License Administrator, you can find it attached to this post.

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
*Expert Elite*
DarrenP
Posts: 7,156
Registered: ‎09-13-2007
Message 3 of 70 (10,153 Views)

Re: Autodesk Network License Manager 2014

04-01-2013 10:08 AM in reply to: TravisNave

i was hoping they would switch to the flex net publisher

*Expert Elite*
TravisNave
Posts: 9,930
Registered: ‎01-14-2005
Message 4 of 70 (10,140 Views)

Re: Autodesk Network License Manager 2014

04-01-2013 10:19 AM in reply to: TravisNave

As in previous iterations of the NLM upgrades, this version also seems to suffer from the same -15 errors, IPv6 issues, and the subsequent exiting of the adskflex.exe vendor daemon on Windows 8 and Server 20xx R2 installations. 

 

I was able to get it working with no problems on Windows 7, Server 2003, and Windows XP.  However, if you are installing on newer machine configurations, you will want to see my posts about fixing -15 errors here:

 

http://forums.autodesk.com/t5/Installation-Licensing/Network-License-Error-1-5-15-and-IPv6/m-p/29828...

 

Subsequently, you may find success in running the 11.7 version of the adskflex.exe vendor daemon, as I have done on my Windows 8 machine.  If you would like to use this file with the latest NLM, you can.  I have attached the older 11.7 version zipped here.

 

 

 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
*Expert Elite*
TravisNave
Posts: 9,930
Registered: ‎01-14-2005
Message 5 of 70 (10,143 Views)

Re: Autodesk Network License Manager 2014

04-01-2013 10:21 AM in reply to: DarrenP

DarrenP wrote:

i was hoping they would switch to the flex net publisher


I agree, Darren.  I keep hearing rumors about cloud licensing though.  Hard telling...

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave
*Expert Elite*
DarrenP
Posts: 7,156
Registered: ‎09-13-2007
Message 6 of 70 (10,139 Views)

Re: Autodesk Network License Manager 2014

04-01-2013 10:22 AM in reply to: TravisNave

TravisNave wrote:

I agree, Darren.  I keep hearing rumors about cloud licensing though.  Hard telling...


i have heard of that too
supposedly they are testing this with certain accounts

Contributor
rseiple
Posts: 15
Registered: ‎12-14-2009
Message 7 of 70 (9,981 Views)

Re: Autodesk Network License Manager 2014

04-10-2013 01:38 PM in reply to: TravisNave

Isn't this the same one that came with 2013 software? If so, then we should be able to use the existing LMTools already installed from last year. Correct? Just checking. Thanks.

*Expert Elite*
DarrenP
Posts: 7,156
Registered: ‎09-13-2007
Message 8 of 70 (9,979 Views)

Re: Autodesk Network License Manager 2014

04-10-2013 01:39 PM in reply to: rseiple

no a new license manager version comes out every year

2013 is 11.10

2014 is 11.11

Contributor
rseiple
Posts: 15
Registered: ‎12-14-2009
Message 9 of 70 (9,975 Views)

Re: Autodesk Network License Manager 2014

04-10-2013 01:47 PM in reply to: DarrenP

that's strange because mine shows the following:

 

4-10-2013 4-31-25 PM.jpg

*Expert Elite*
TravisNave
Posts: 9,930
Registered: ‎01-14-2005
Message 10 of 70 (9,962 Views)

Re: Autodesk Network License Manager 2014

04-10-2013 03:26 PM in reply to: rseiple

Then your license manager is already upgraded.  However, the vendor daemon from Autodesk changes every year as well. 

Travis Nave Send TravisNave a Private Message                       Need help in your post? Mention me with @TravisNave

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube