Installation & Licensing

Reply
*Becker, Craig J.
Message 1 of 6 (153 Views)

Acad 14 and Acad2000 same Network

153 Views, 5 Replies
11-05-1999 01:58 PM
We recently upated some of our AutoCad clients to 2000 from rev. 14 and now
the NetWare 5 server loses the license for both rev 14 & 2000. The ADLM
loads fine on the server, but when you try to access the license nothing
happens. The only way to get it to work is to reboot the server. Is this a
NEW problem with the Autocad 2000 license. We weren't having this problem
until the 2000 license was installed.

Any help is appreciated,
-Craig
cbecker@ci.arvada.co.us
*Land, Greg
Message 2 of 6 (153 Views)

Re: Acad 14 and Acad2000 same Network

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
We are looking at upgrading R14.01 to Acad2K. We have two seperate
groups at this location. I want to upgrade my group to 2k and leave the
other group on R14.01. Can this be done on the same server? Possibly
installing software into seperate network drives?
*Bill
Message 3 of 6 (153 Views)

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
We were doing that for a while but kept having problems...i suggest not
splitting like that...

Bill
Greg Land wrote in message
news:3805D5A6.2356A74F@egs-eg.com...
> We are looking at upgrading R14.01 to Acad2K. We have two seperate
> groups at this location. I want to upgrade my group to 2k and leave the
> other group on R14.01. Can this be done on the same server? Possibly
> installing software into seperate network drives?
>
*Land, Greg
Message 4 of 6 (153 Views)

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
I did read in an earlier message that you can actually run both versions using
the same adlm licensing software. Can anyone else verify this?

Bill wrote:

> We were doing that for a while but kept having problems...i suggest not
> splitting like that...
>
> Bill
> Greg Land wrote in message
> news:3805D5A6.2356A74F@egs-eg.com...
> > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > groups at this location. I want to upgrade my group to 2k and leave the
> > other group on R14.01. Can this be done on the same server? Possibly
> > installing software into seperate network drives?
> >
*aricad
Message 5 of 6 (153 Views)

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
Hello Greg,

Yes you can do it. You have one code for the 14.01 group and another for the A2k
group
running both the same adlm on the server.

Franck Hervet
st@aricad.fr

Greg Land a écrit :

> I did read in an earlier message that you can actually run both versions using
> the same adlm licensing software. Can anyone else verify this?
>
> Bill wrote:
>
> > We were doing that for a while but kept having problems...i suggest not
> > splitting like that...
> >
> > Bill
> > Greg Land wrote in message
> > news:3805D5A6.2356A74F@egs-eg.com...
> > > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > > groups at this location. I want to upgrade my group to 2k and leave the
> > > other group on R14.01. Can this be done on the same server? Possibly
> > > installing software into seperate network drives?
> > >
*Schroeder, Bud
Message 6 of 6 (153 Views)

Re:

11-05-1999 01:58 PM in reply to: *Becker, Craig J.
I would suggest that you update to the Elan version on the AutoCAD 2000 CD though,
it has a few small changes over what R14.01 had. Not a lot, but it could come in
handy.

Take care.

Bud

aricad wrote:

> Hello Greg,
>
> Yes you can do it. You have one code for the 14.01 group and another for the A2k
> group
> running both the same adlm on the server.
>
> Franck Hervet
> st@aricad.fr
>
> Greg Land a écrit :
>
> > I did read in an earlier message that you can actually run both versions using
> > the same adlm licensing software. Can anyone else verify this?
> >
> > Bill wrote:
> >
> > > We were doing that for a while but kept having problems...i suggest not
> > > splitting like that...
> > >
> > > Bill
> > > Greg Land wrote in message
> > > news:3805D5A6.2356A74F@egs-eg.com...
> > > > We are looking at upgrading R14.01 to Acad2K. We have two seperate
> > > > groups at this location. I want to upgrade my group to 2k and leave the
> > > > other group on R14.01. Can this be done on the same server? Possibly
> > > > installing software into seperate network drives?
> > > >

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube