The plot, options and page setup dialogs usually exhibit this problem when
the machine has some network resource (mapped drive or plotter) that points
to a location that either doesn't exist anymore, or can't be reached.
I have also seen it happen if you have a PC3 file that uses a system device,
and then you re-create that system device using a different driver, or if
that system device no longer exists.
Hope this helps,
Jon Rizzo
Langan Engineering and Environmental Services, Inc.
"Michael Veilleux" wrote in message
news:40C2DF56515708AA4E9D6547BB0D101A@in.WebX.maYIadrTaRb...
> Have (2) IDENTICAL brand new Dell Pentium 4 machines.
> Windows XP Professional
> ACAD 2002 (2 network licenses)
>
> ACAD deployed from NT server.
>
> First computer was setup 2 weeks ago....lightening fast..everything works
> great..
>
> Ran the exact same deployment for the 2nd computer today.
>
> Install was successful.
>
> however....
>
> Open up ACAD, everything comes up, then the command prompt appears...and
it
> hangs up for about 20 seconds...
> In addition, whenever we use "options" "plot" or "page setup" it hangs up
> for 10-15 seconds....
>
> any reasons for this madness???
>
>
> -mike
>
>
