Installation & Licensing

Reply
Valued Contributor rob
Valued Contributor
rob
Posts: 68
Registered: ‎04-12-2006
Message 1 of 3 (909 Views)
Accepted Solution

3ds Max 2013 fails to install after clean and complete removal.

909 Views, 2 Replies
06-11-2012 02:07 PM

After removing all my autodesk products using the instructions in the service and support section, I can not reinstall 3dstudio Max.  The reinstall of Architecture was successful and the database that was corrupted has been restored.

 

So now I need help with understanding why I can get Studio to install.  Below is the log that was created during the install attempt.  I noted in the log where it failed in both "Normal" and "Safe" modes.  Please help me to figure out what I need to do to get this thing installed.  Thanks.

 

2012/6/11:14:54:09    rjole    ARCHITECTURE6    PageOpen    InstallCompleteDialog        
2012/6/11:14:56:19    rjole    ARCHITECTURE6    === Setup ended ===

NORMAL MODE

2012/6/11:15:05:27    rjole    ARCHITECTURE6    === Setup started on ARCHITECTURE6 by rjole ===
2012/6/11:15:05:27    rjole    ARCHITECTURE6    Launch
2012/6/11:15:05:27    rjole    ARCHITECTURE6    [Error: 1052] The requested control is not valid for this service.
2012/6/11:15:05:45    rjole    ARCHITECTURE6    PageOpen    LaunchDialog        
2012/6/11:15:05:52    rjole    ARCHITECTURE6    PageOpen    LicenseDialog        
2012/6/11:15:05:57    rjole    ARCHITECTURE6    PageOpen    ProductInfoDialog        
2012/6/11:15:06:30    rjole    ARCHITECTURE6    PageOpen    ProductSelectionDialog2        
2012/6/11:15:12:51    rjole    ARCHITECTURE6    PageOpen    FullProgressDialog        
2012/6/11:15:12:52    rjole    ARCHITECTURE6    Installing DirectX® Runtime: E:\3rdParty\DirectX\DXSETUP.exe /silent
2012/6/11:15:16:07    rjole    ARCHITECTURE6    Install    DirectX® Runtime    Succeeded    
2012/6/11:15:16:08    rjole    ARCHITECTURE6    Installing Autodesk® 3ds Max 2013:  TRANSFORMS="C:\Users\rjole\AppData\Local\Temp\_AI68DF.tmp\x64\max\3dsMax2013-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="E:\" INSTALLDIR="C:\Program Files\Autodesk\3ds Max 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

2012/6/11:15:35:23    rjole    ARCHITECTURE6    Install    Autodesk® 3ds Max 2013    Failed    Installation aborted, Result=1602
2012/6/11:15:35:23    rjole    ARCHITECTURE6    Rollback    DirectX® Runtime    Failed    Failure is ignored, Result=1619
2012/6/11:15:35:26    rjole    ARCHITECTURE6    PageOpen    InstallCompleteDialog        
2012/6/11:15:35:30    rjole    ARCHITECTURE6    === Setup ended ===

SAFE MODE

2012/6/11:15:39:45    rjole    ARCHITECTURE6    === Setup started on ARCHITECTURE6 by rjole ===
2012/6/11:15:39:45    rjole    ARCHITECTURE6    Launch
2012/6/11:15:40:01    rjole    ARCHITECTURE6    PageOpen    LaunchDialog        
2012/6/11:15:40:03    rjole    ARCHITECTURE6    PageOpen    LicenseDialog        
2012/6/11:15:40:06    rjole    ARCHITECTURE6    PageOpen    ProductInfoDialog        
2012/6/11:15:40:40    rjole    ARCHITECTURE6    PageOpen    ProductSelectionDialog2        
2012/6/11:15:42:28    rjole    ARCHITECTURE6    PageOpen    FullProgressDialog        
2012/6/11:15:42:28    rjole    ARCHITECTURE6    Installing DirectX® Runtime: E:\3rdParty\DirectX\DXSETUP.exe /silent
2012/6/11:15:44:57    rjole    ARCHITECTURE6    Install    DirectX® Runtime    Succeeded    
2012/6/11:15:44:58    rjole    ARCHITECTURE6    Installing Autodesk® 3ds Max 2013:  TRANSFORMS="C:\Users\rjole\AppData\Local\Temp\_AIB412.tmp\x64\max\3dsMax2013-standalone.mst" ADSK_EULA_STATUS=#1 MUILANG=en-us ADSK_SOURCE_ROOT="E:\" INSTALLDIR="C:\Program Files\Autodesk\3ds Max 2013\" FILESINUSETEXT="" REBOOT=ReallySuppress ADSK_SETUP_EXE=1

2012/6/11:15:44:58    rjole    ARCHITECTURE6    Install    Autodesk® 3ds Max 2013    Failed    Installation aborted, Result=1601
2012/6/11:15:44:58    rjole    ARCHITECTURE6    Rollback    DirectX® Runtime    Failed    Failure is ignored, Result=1601

Valued Contributor rob
Valued Contributor
rob
Posts: 68
Registered: ‎04-12-2006
Message 2 of 3 (896 Views)

SOLVED: 3ds Max 2013 fails to install after clean and complete removal.

06-12-2012 06:58 AM in reply to: rob

[Solved]

It turns out that it takes a full 48 minutes to re-install the software.  


I just needed to update my patience to the latest version.

New Member
ronaldTarrant
Posts: 2
Registered: ‎04-12-2012
Message 3 of 3 (268 Views)

Re: SOLVED: 3ds Max 2013 fails to install after clean and complete removal.

04-14-2013 01:35 AM in reply to: rob

I'm having the exact same problem, reinstall failure in exactly the same place.

 

You say you had to be patient, but how did that get you around the pop-up error where it complains about a bad registry key?

You are not logged in.

Log into access your profile, ask and answer questions, share ideas and more. Haven't signed up yet? Register

Announcements
Are you familiar with the Autodesk Expert Elites? The Expert Elite program is made up of customers that help other customers by sharing knowledge and exemplifying an engaging style of collaboration. To learn more, please visit our Expert Elite website.

Need installation help?

Start with some of our most frequented solutions to get help installing your software.

Ask the Community


Up & Ready Blog

Boldly Install, Configure and Deploy Autodesk Software.

AutodeskHelp Blog

Your one-stop shop for the latest solutions, breaking news, and behind the scenes access to the world of Autodesk support.

Connect with Us

Twitter

Pinterest

Blog

Youtube